A great deal of attention has recently been focused upon "enhanced oil recovery"; that is, the application of recently developed processes for recovering oil that would normally remain in a reservoir following depletion by conventional techniques. Since this heretofore unrecoverable remaining oil amounts to about 300 billion barrels in the U.S. alone (see Figure 1), one can see why enhanced rec...

The community diversities of two oil reservoirs with low permeability of 1.81 × 10(-3) and 2.29 × 10(-3) μm(2) in Changqing, China, were investigated using a high throughput sequencing technique to analyze the influence of biostimulation with a nutrient activator on the bacterial communities. These two blocks differed significantly in salinity (average 17,500 vs 40,900 mg/L). A core simulation ...

Abstract The Asmari reservoir in Haftkel field is one of the most prolific naturally fractured reservoirs Zagros folded zone southwest Iran. primary production was commenced 1928 and continued until 1976 with a plateau rate 200,000 bbl/day for several years. There an initial gas cap on oil column. Gas injection June so far, 28% place have been recovered. As far as we concerned, fracture network...

The main factor affecting the economics of foam-assisted water alternative gas (FAWAG) process is the loss of foaming agent by adsorption onto reservoir rocks. In this study, the effects of phases, surfactant concentration, salinity, adsorbents, and sacrificial agent on adsorption density were investigated by special adsorption experiments. Moreover, a series of FAWAG tests were performed to ex...

Biosurfactant producers are crucial for incremental oil production in microbial enhanced oil recovery (MEOR) processes. The isolation of biosurfactant-producing bacteria from oil reservoirs is important because they are considered suitable for the extreme conditions of the reservoir. In this work, a novel biosurfactant-producing strain Acinetobacter junii BD was isolated from a reservoir to red...

Steam injection is the most suitable of Enhanced Oil Recovery (EOR) methods to recover high viscosity oil. This is due to the capabilities of steam to reduce oil viscosity and increase the sweep capability of oil from the injection well toward the production well. Oil operating conditions in production should be match well with the operating condition target at the bottom of the production well...

fractures are considered as one of the important structures in fractured reservoirs due to their effect on fluid currents and reservoirparameters such as porosity and permeability. fracture parameters can only be directly calculated with core and image logs. cores haveserious limitations, so image logs are the best method. the aim of this study is the systematic fractures analysis of the asmari...

The energy demand in our modern society is continuously rising, which clearly shows that fossil fuels will for many decades still play an important role – oil and natural gas are important energy resources in this picture. Nevertheless, oil and natural gas reserves are limited, and it is therefore a prioritized task to produce more oil and gas from existing wells and reservoirs for better explo...

resulting in decreased energy consumption and increased Experiments were performed to study bitumen film rupture and bitumen recovery, is the impetus for undertaking a systemdisplacement on model surfaces. Bitumen film on a glass plate atic study of the mechanisms involved in oil–water displacewas found to thin down and rupture in the presence of water ment on a solid surface. Such mechanistic ...

a new chemical compound is developed at petroleum university of technology to enhance therecovery of the free imbibition process and simultaneously hinder asphaltene precipitation. thecompound is tested on heavy oil samples from marun oil field, bangestan reservoir. the effects ofthe chemical compound on viscosity, hydrocarbon composition, and average molecular weight ofthe heavy oil are invest...