BACKGROUND Smokeless tobacco use is common in various parts of the world. In Turkey a type of smokeless tobacco called "Maras powder" is widely used in southeastern region. Smoking is known to have an adverse effect on nitric oxide and cardiovascular risk factors. The aim of this study was to evaluate whether there is difference between the effects of Maras powder and cigarette smoking on the c...

A numerical study is made of transient heat and mass transfer in metal hydride beds in the hydriding process with the addition of internal aluminum plates. The two-dimensional equations governing the hydration kinetics, hydrogen ̄ow and heat transfer are solved by using the iterative method based on the ®nite-volume technique. It is found that the heat transfer is enhanced by the installation o...

Using a fast X-ray tomography setup measurements have been done on a 25 cm diameter f luidized bed of Geldart B pow^der and a 24 cm bed of Geldart A powder. The average bubble sizes have been determined over a measurement period of 60 seconds. The resolution of this setup is about 4.5 m m per pixel at a rate of 250 reconstructions per second. I t is possible to detect bubbles as small as 2.5 cm...

Electron Beam Melting (EBM R ©) is a near-net-shape additive manufacturing technology developed by Arcam AB, where Ti-6Al-4V alloy powder is commonly used to manufacture medical implants and components for the aerospace industry. Although Arcam has developed special specifications of some parameters for the powders, the powders from different manufacturers do not behave in the same way in the E...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

Lithium ion conductors 5. Lithium Nitride Li3N 6. Lithium Lanthanum Titanium Oxide, Li3xLa0.67-xTiO3 7. Lithium Titanium Phosphate, LiTi2(PO4)3 Sodium ion conductors 8. Sodium β-Alumina, Na2O)1+x(Al2O3)11 9. Sodium β”-Alumina, Li-stabilized, Na1.5(Li0.25Al10.75)O17 10. Sodium β-Gallate, (Na2O)*n(Ga2O3) 11. Sodium β”-Gallate, Na1.98Ga10.673 O17 12. Sodium Yttrium Silicate, Na5YSi4O12 13. Sodium ...

OBJECTIVE The purpose of this study was to evaluate the effects of three different surface conditioning methods on the shear bond strength (SBS) of metal brackets bonded directly to gold alloy with chemically cured resin. METHODS Two hundred ten type III gold alloy specimens were randomly divided into six groups according to the combination of three different surface conditioning methods (alu...

The use of aluminum oxide as the gate insulator for low temperature (600 C) polycrystalline SiGe thin-film transistors (TFT’s) has been studied. The aluminum oxide was sputtered from a pure aluminum target using a reactive N2O plasma. The composition of the deposited aluminum oxide was found to be almost stoichiometric (i.e., Al2O3), with a very small fraction of nitrogen incorporation. Even wi...

Introduction: Although aluminum oxide nanoparticles (Al2O3-NPs) are the most widely used nanomaterials, limited studies have been reported on their toxicology. Therefore, the present study aimed to investigate the potential toxicity of aluminum oxide (alumina) nanoparticles and the protective role of aqueous extract of wormwood plant on nanomaterial-induced disorders in the lung of rats. Mater...