Finite element simulation of stretch flanging process was carried out in order to investigate the effect of process parameters on maximum thinning (%) in stretch flanging process. Influences of initial flange length, punch die clearance, width of sheet metal blank and blank holding force were investigated on maximum thinning (%). Finite element simulation was done using FEM software package ABA...

This study presents environmentally friendly and low-cost synthetic routes to produce antimicrobial coatings over 5052 Al alloy based on plasma electrolytic oxidation (PEO) technology. Two methodologies were explored: the decoration with copper anodic doping ions. The porous oxide layers produced in silicate media presented two consisting of γ-Al2O3 crystalline phase amorphous phases aluminosil...

Generally, an approximately 1% weight reduction in a 200 kg automobile improves the fuel economy by 20~26% and acceleration performance 8%. Hence, various techniques for automotive lightweighting have been developed to satisfy environmental regulations of industry. The joining dissimilar materials is critical assembling lightweight body structures, but fusion welding inapplicable owing differen...

In an effort to maximize grain growth of open-die forged 6061 aluminum alloy parts, samples from three of Weber Metals’s suppliers (Hidal Co-Almex USA Inc., TST Inc., and Vista Metals Corp.; to be called Supplier H, Supplier T, Supplier V respectively) were cut into cylinders with diameters of 0.75 ̋ and heights of 2 ̋, and put through a simulated forging process and heat treatment. It is possibl...

in the present work, the effect of aluminum content, austenitizing temperature and austempering time and temperature on the mechanical properties and hardness of fe-c-al grey cast iron was investigated. for this purpose, three alloys containing 1, 2 and 4 weight percent of aluminum were provided. the tensile samples were austenitized at 850?c and 900?c for 120 min, followed by austempering proc...

A study was carried out on the aging behaviour of a solution treated 6082 aluminium alloy deformed by equal channel angular pressing up to six passes. Aging of the so obtained ultrafine alloy was studied by DSC and TEM analyses as well as by isothermal treatments at 130, 160 and 180 C. The results showed that the formation of metastable 00 and 0 precipitates were markedly anticipated and that t...