The use of aluminum oxide as the gate insulator for low temperature (600 C) polycrystalline SiGe thin-film transistors (TFT’s) has been studied. The aluminum oxide was sputtered from a pure aluminum target using a reactive N2O plasma. The composition of the deposited aluminum oxide was found to be almost stoichiometric (i.e., Al2O3), with a very small fraction of nitrogen incorporation. Even wi...

Ru is considered as an effective active species for N2O decomposition; however, there is disagreement about which ruthenium species is key for catalytic activity. In order to understand the role of Ru species in N2O decomposition, Ru/Al2O3 (Ru/Al2O3-H2, Ru/Al2O3-NaBH4, Ru/Al2O3-air) catalysts with different ratios of metallic Ru were prepared and evaluated for their catalytic activities. Variou...

the no removal over oxide sorbents (k2o/al2o3 , cao/al2o3 and bao/al2o3) at a loading of up to 25 wt.% was investigated using a synthetic diesel exhaust gas containing  1,000 ppm no, 1000 ppm iso-butane (i-c4h10), 8% o2 and n2 balance. the reactor was operated  at 250 oc to 450 oc for the activity study. no was effectively stored (removal efficiencies between 30-60 %) as nitrate under experimen...

Although the response of macrophages to polyethylene debris has been widely studied, it has never been compared with the cellular response to ceramic debris. Our aim was to investigate the cytotoxicity of ceramic particles (Al2O3 and ZrO2) and to analyse their ability to stimulate the release of inflammatory mediators compared with that of high-density polyethylene particles (HDP). We analysed ...

Gold nanoparticles on Al2O3-coated gold films are presented as a chemically and thermally robust platform for molecular sensing. Single particle spectroscopy as a function of Al2O3 coating thickness shows reproducible gold nanoparticle scattering spectra in the range from 690 to 610 nm as the Al2O3 thickness increases from 0 to 3.4 nm. Numerical simulation of these structures indicates that sur...

Advanced ceramic materials are gradually becoming very important for their superior properties such as high hardness, wear resistance, chemical resistance, and high strength to weight ratio. But machining of advanced ceramic like Al2O3-ceramics is very difficult by any well known and common machining processes. Normally, cleavages and triangular fractures generate when machining of these materi...

ZnO/Al2O3 multilayers were prepared by alternating atomic layer deposition (ALD) at 150°C using diethylzinc, trimethylaluminum, and water. The growth process, crystallinity, and electrical and optical properties of the multilayers were studied with a variety of the cycle ratios of ZnO and Al2O3 sublayers. Transparent conductive Al-doped ZnO films were prepared with the minimum resistivity of 2....

This work reports on recent advances in the deposition of non-wettable coatings with high water contact angles (WCAs). We propose a simple and easily-controlled method for fabricating different types of nanoestructured films of Al2O3 with hydrophobic properties by Physical Vapour Deposition (PVD). The films have been deposited over three types of hydrophilic substrates with very different value...

A series of ZnMgNiAl layered double hydroxides (LDHs) containing 20 wt.% Ni and different Zn/Mg molar ratios were prepared by a coprecipitation method, and then were introduced with H2PO4 via a microwave-hydrothermal method. With the resulting mixtures as the precursors, Zn/Mg-modified ZnMgNi–P/Al2O3 catalysts were prepared. The Zn/Mg molar ratio affected the formation of Ni2P and Ni12P5 in nic...

X-ray diffraction was utilized to follow the transformation from β-SiC (3C) to the various α-SiC polytypes in the presence of AlN and Al2O3 additives after hot pressing from 1700 to 2100 ◦C. The 2Hand 6H-polytypes of α-SiC were the predominate polytypes with additions of only AlN or Al2O3, respectively. The amount of 2Hand 6H-polytypes, and subsequently the microstructural morphology of the SiC...