نتایج جستجو برای: صفحات پلیمری cfrp
تعداد نتایج: 11560 فیلتر نتایج به سال:
A quick method involving the control of heat and water vapor pressure for preparing moisture-saturated carbon fiber-reinforced plastics (CFRP, 8 unidirectional prepreg layers, 1.5 mm thickness, epoxy resin) has been developed. The moisture-saturated CFRP sample was obtained at 120 ̋C and 0.2 MPa water vapor in 72 h by this method using a sterilizer (autoclave). The bending strength and viscoela...
We implanted titanium and carbon fibre-reinforced plastic (CFRP) femoral prostheses of the same dimensions into five prosthetic femora. An abductor jig was attached and a 1 kN load applied. This was repeated with five control femora. Digital image correlation was used to give a detailed two-dimensional strain map of the medial cortex of the proximal femur. Both implants caused stress shielding ...
This paper presents results of testing twelve hollow square reinforced concrete specimens wrapped with Carbon fibre reinforced polymer CFRP. The effect of ply configuration on the behaviour of the specimens is investigated. All specimens were 800mm high and had the dimensions of 200mm× 200mm in cross-section and a hollow core of 80mm× 80mm. The specimens were divided into four groups with three...
Delamination monitoring in carbon fiber reinforced polymer (CFRP) laminated plates is crucial to ensure the integrity and safety of the structures that accommodate the plates. To identify delaminations in CFRP laminated plates, the two-dimensional (2D) curvature mode shape method is a prevailing method that features instant and simultaneous determination of the presence and location of the dela...
This paper describes an experimental program undertaken at the University of Manitoba to study the serviceability of concrete beams prestressed by carbon fibre reinforced plastic (CFRP) rods. The experimental program consisted of eight concrete beams prestressed by CFRP rods and two concrete beams prestressed by conventional steel strands. The beams were tested using two static concentrated loa...
The HEPHAISTOS system integrates advantageously the basic processing steps as tooling, tempering of the resin and lay up, the impregnation of the fibers, pre-forming techniques as well as finally the process curing of the composite structures. Composites for aerospace applications in prepreg and wet technology have been successfully fabricated and investigated for quality and certification issu...
Strengthening of existing circular reinforced concrete columns by CFRP confinement
روشهای مختلفی برای تعمیر وتقویت سازه های بتن آرمه وجود دارد که از جمله آن ها می توان به استفاده از ژاکت های بتنی، ژاکت های فولادی و ژاکت های پلیمری اشاره نمود. استفاده از ژاکت های پلیمری به دلیل خواص آن، مقاومت و سختی بالا، وزن اندک، مقاومت در برابر خوردگی، نا همسانگرد بودن این مواد و طراحی بهینه، نصب آسان و سریع و هزینه کمتر ( شامل زمان، مصالح و اجرا ) نسبت به ژاکت های فولادی مورد توجه قرار گر...
This paper investigates the hygrothermal effects on the failure mechanisms in bending of carbon fibre reinforced polymer (CFRP) composites. Accelerated diffusion testing was carried out by immersion at 50°C constant temperature and 70 bar hydrostatic pressure to study the effects of fresh or sea water diffusion into pre-preg CFRP laminates. Consequently the composite laminates were tested in be...
In pre-stressed concrete structures, consideration is being given to replacing the steel tendons with CFRP rods. One of the challenges associated with this is to develop a suitable anchorage for the CFRP rods. A bonded anchorage was investigated, where the CFRP is potted in a steel tube using epoxy adhesive. Experimental static tests of different configurations were undertaken with failure occu...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید