the built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. the built up layer (bul) is formed in second deformation zone near the tool-chip interface in the back of the chip. this parameter influences the tool life and machined surface quality. this bul should not be confused with the built up edge (bue). the deformation of the bul in...

Geological Disposal Facilities (GDF) for radioactive waste will generally rely on clay-rich materials as a host geological formation and/or engineered barrier. Gas be produced within the GDF, which can build up significant gas pressure and activate migration of through clay via different transport mechanisms. These mechanisms are usually investigated in laboratory tests small samples few centim...

The present research work is concerned with the effects of optimum process variables in elevated temperature hydro-mechanical deep drawing of 5052 aluminum alloy. Punch-workpiece and die-workpiece friction coefficients together with the initial gap between the blank holder and matrix were considered as the process variables which, in optimization terminology, are called design parameters. Since...

The incremental sheet metal forming (ISMF) process is a new and flexible method that is well suited for small batch production or prototyping. This paper studies the use of the finite element method in the incremental forming process of AA1050 sheets to investigate the influence of tool diameter, vertical step size, and friction coefficient on forming force, spring-back, and thickness distribut...

the natural frequencies and mode shapes of pneumatic tires are predicted using a geometrically accurate, three-dimensional finite element modeling. tire rubber materials and cord layers are represented independently using “shell element” available in cosmos. the effects of some physical parameters such as the inflation pressure tread pattern, thickness of belts and ply angles to the natural fre...

| In this paper we fromulate and study a domain decomposition algorithm for solving mixed nite element approximations to parabolic initial-boundary value problems. In contrast to the usual overlapping domain decomposition method this technique leads to noniterative algorithms, i.e. the subdomain problems are solved independently and the solution in the whole domain is obtained from the local so...

Abstract: The seepage control system of a high Concrete Face Rock-Fill Dam (CFRD) may have anti-seepage deficiencies during both construction and operation. In order to solve these, the three-dimensional Finite Element Method (FEM) model was built based on dam body filling, anti-seepage system, defect location and bedrock distribution. The seepage field simulation and computation were carried o...

A laminated composite plate element with an interface description is developed using the finite element approach to investigate the bending performance of two-layer cross-ply laminated composite plates in presence of a diagonally perturbed localized interfacial degeneration between laminae. The stiffness of the laminate is expressed through the assembly of the stiffnesses of lamina sub-elements...

tube hydroforming (thf) process is used to produce the complex components from the initial cylindrical tubes. in this paper, t- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...