An integrated cellulose polymer concentrator/single-walled carbon nanotube (SWCNT) sensing system is demonstrated to detect benzene, toluene, and xylenes (BTX) vapors. The sensing system consists of functionalized cellulose as a selective concentrator disposed directly on top of a conductive SWCNT sensing layer. Functionalized cellulose concentrator (top layer) selectively adsorbs the target an...

Advances in the separation and functionalization of single walled carbon nanotubes (SWCNT) by their electronic type have enabled the development of ratiometric fluorescent SWCNT sensors for the first time. Herein, single chirality SWCNT are independently functionalized to recognize either nitric oxide (NO), hydrogen peroxide (H(2)O(2)), or no analyte (remaining invariant) to create optical sens...

Single-walled carbon nanotube (SWCNT) transparent conducting films (TCFs) were fabricated for the electrodes of organic light-emitting diodes (OLEDs); three types of film were studied. The as-prepared SWCNT TCFs displayed a relatively low sheet resistance of 82.6 Ω/sq at 80.7 T% with a relatively large surface roughness of 30 nm. The TCFs were top-coated with poly(3,4-ethylenedioxythiophene):po...

With a range of desirable mechanical and optical properties, single wall carbon nanotubes (SWCNTs) are a promising material for nanobiotechnologies. SWCNTs also have potential as biomaterials for modulation of cellular structures. Previously, we showed that highly purified, dispersed SWCNTs grossly alter F-actin inside cells. F-actin plays critical roles in the maintenance of cell structure, fo...

Significant progress has been achieved for flexible polymer thermoelectric (TE) composites in the last decade due to their potential application wearable devices and sensors. In sharp contrast exceptional increase TE studies at room temperature, mechanical performance of received relatively less attention despite significance high-temperature environments. The performances poly(3,4-ethylenediox...

Abstract Free vibration of a single-walled carbon nanotube (SWCNT) embedded in an elastic medium is studied on the basis nonlocal Timoshenko beam model. Influences slenderness ratios, boundary conditions, atomic structures and stiffness natural frequencies mode shapes SWCNT are examined. The effect significant for higher modes with small ratio soft medium, it softens except fundamental frequenc...

Sonication with nucleic acids has become a standard method for obtaining aqueous dispersions of carbon nanotubes. On the basis of theoretical studies and scanning probe microscopy (SPM) imaging a widely accepted model for DNA association with SWCNT is one in which the DNA binds through non-covalent p-stacking and hydrophobic interactions. Following the standard procedures established by others ...

Gold nanoparticles have been proven to act as efficient catalysts for chemical reactions, such as oxidation and hydrogen production. In this review we focus on a different aspect of the catalysis of gold nanoparticles; single-walled carbon nanotube (SWCNT) synthesis. This is not a traditional meaning of catalytic reaction, but SWCNTs cannot be synthesized without nanoparticles. Previously, gold...

A new method was used to measure the fraction of semiconducting nanotubes in various as-grown or processed single-walled carbon nanotube (SWCNT) samples. SWCNT number densities were compared in images from near-IR photoluminescence (semiconducting species) and AFM (all species) to compute the semiconducting fraction. The results show large variations among growth methods and effective sorting b...

We report on the lowest temperature of SWCNT growth using endothermic decomposition of CH4 gas on a specially activated alumina-supported Fe:Mo catalyst. However, the observed lowest growth temperature (560 degrees C) is higher than that reported previously for exothermic feedstock type. Our observation indicates that the decomposition threshold temperature of the feedstock limits the SWCNT gro...