The development of large scale wind farms that can compete with conventional energy resources presents significant challenges to today’s wind energy industry. A powerful solution to these daunting challenges can be offered by a synergistic consideration of the key design elements (turbine selection and placement) and the variations in the natural resource. This paper significantly advances the ...

Wind turbine conversion systems require feedback control to achieve reliable wind turbine operation and stable current supply. A robust linear parameter varying (LPV) controller is proposed to reduce the structural loads and improve the power extraction of a horizontal axis wind turbine operating in both the partial load and the full load regions. The LPV model is derived from the wind turbine ...

Annoyance, recognition and detection of noise from a single wind turbine were studied by means of a two-stage listening experiment with 50 participants with normal hearing abilities. In-situ recordings made at close distance from a 1.8-MW wind turbine operating at 22 rpm were mixed with road traffic noise, and processed to simulate indoor sound pressure levels at LAeq 40 dBA. In a first part, w...

Estimates of the effective wind speed disturbances acting on a turbine are useful in a variety of control applications. A Kalman filter-based wind speed estimator is presented here for estimation of the effective hub-height wind speed as well as linear horizontal and vertical shear components. The wind speed estimator is evaluated using an aeroelastic simulator with the National Renewable Energ...

This paper shows a strategy to carry out a wind turbine LPV (Linear Parameter Varying) and MIMO (Multivariable Input and Multivariable Output) model from a family of LTI (Linear Time Invariant) models. The family of LTI models is obtained from a linearization process in different operational points of the wind turbine model in GH Bladed. The procedure is valid for any family of LTI models obtai...

A solar chimney power plant consists of four main parts, a solar collector, a chimney, an energy storage layer, and a wind turbine. So far, several investigations on the performance of the solar chimney power plant have been conducted. Among them, different approaches have been applied to model the turbine inside the system. In particular, a real wind turbine coupled to the system was simulated...

A short overview of composite materials for wind turbine applications is presented here. Requirements toward the wind turbine materials, loads, as well as available materials are reviewed. Apart from the traditional composites for wind turbine blades (glass fibers/epoxy matrix composites), natural composites, hybrid and nanoengineered composites are discussed. Manufacturing technologies for win...

An experimental study was performed to examine the wake characteristics and aeromechanic performance of an innovative twin-rotor wind turbine (TRWT) in comparison with those of a conventional single-rotor wind turbine (SRWT). The comparative study was conducted in a large-scale Aerodynamic/Atmospheric Boundary Layer (AABL) wind tunnel with the TRWT and SRWT model sited in simulated atmospheric ...

This work proposes a novel control scheme for a variable speed wind turbine system based on the permanent magnet synchronous generator. Regions II and III for a wind speed profile are considered, hence the control is designed for maximizing the generated power from the wind turbine when the wind speed is below the nominal wind speed, and to saturate the generated power when the wind speed is ab...

Wind turbine preview control has recently attracted attention in the literature. This is due to significant load attenuation and power optimization benefits that can be obtained by incorporating wind preview measurements into the turbine control laws. However, the trade-offs between performance, preview time, and actuation rate limits are not well understood. This paper investigates the fundame...