4 A newly emerging microbiological soil stabilization method, known as microbially 5 induced calcite precipitation (MICP), is tested for geotechnical engineering 6 applications. MICP is a promising technique that utilizes the metabolic pathways of 7 bacteria to form calcite precipitation throughout the soil matrix, leading to an increase 8 in soil strength and stiffness. This paper investigates...

In this paper the influence of microstructure on crack initiation stress and ultimate strength is investigated using results and analysis of 32 triaxial compression tests performed on cylindrical cores of dolomite samples which exhibit a wide range of grain sizes and mosaic textures. All tests were performed at a constant strain rate, under confining pressures between 0 to 40 MPa. The predictiv...

In this paper, regression analysis method i.e., traditional method and ridge regression is applied on the dataset collected for the prediction of compressive strength of concrete. When regression analysis is applied and data set is increased or decreased, the regression coefficients have drastically changed their values like the negative coefficients changed to positive or vice versa. So, tradi...

Results: The experiment results indicate that the type of recycled aggregate and its replacement ratio have significant effects on the freezethaw performance. The cubic compressive strength of recycled aggregate concrete is overall slightly lower than that of normal concrete. After 100 freeze-thaw cycles, the compressive strength decreases and the reduction extent increases with increasing repl...

OBJECTIVES To assess compressive strength and effect of duration after photoactivation on the compressive strength of different dual cure bulk fill composites. METHODS Seventy-two disc shaped (4x10mm) specimens were prepared from three dual cure bulk fill materials, ZirconCore (ZC) (n=24), MulticCore Flow (MC) (n=24) and Luxacore Dual (LC) (n=24). Half of the specimens in each material were t...

The aim of this research was to study the effect of various water-to-cement ratio on the properties of pervious concrete. Tests were carried out to find the optimum water-to-cement ratio that gives a high compressive strength with acceptable permeability. The tests of fresh density, compressive strength at 7days, porosity and water permeability for four mixes of pervious concrete with various w...

In this chapter, we will present the precursors and manufacturing of carbon fibers. Among the precursors used for the production of carbon fibers, polyacrylonitrile (PAN)-based and pitch-based precursors are the most important. A significant amount of work has been done on relating the fiber structure to the properties and translating that relationship into production for either reducing cost o...