The phenomenon of ratchetting is defined as constant accumulation of plastic strain or deformation under combined steady state and cyclic loading. It can reduce the fatigue life or can cause failure of piping components or systems subjected to seismic or other cyclic loads. The uniaxial ratchetting characteristics of SA333 Gr.6 steel have been investigated at room temperature in the present pap...

The objective of this paper was to explore the bond-slip relationship between carbon fiber-reinforced polymer (CFRP) sheets and concrete under cyclic loading through experimental and analytical approaches. Modified beam tests were performed in order to gain insight into the bond-slip relationship under static and cyclic loading. The test variables are the CFRP-to-concrete width ratio, and the b...

Offshore wind turbine (OWT) foundations are subjected to a combination of cyclic and dynamic loading arising from wind, wave, rotor and blade shadowing. Under cyclic loading, most soils change their characteristics including stiffness, which may cause the system natural frequency to approach the loading frequency and lead to unplanned resonance and system damage or even collapse. To investigate...

Prestressing steel wires are commonly used as reinforcement elements in structures bearing fatigue loads. These wires are obtained by a conforming process called cold drawing, where a progressive reduction of the wire diameter is produced, causing residual stress in the commercial wire. The aim of this paper is to analyze the effect of diverse in-service cyclic loading conditions (cyclic loadin...

Repetitive lifting in the workplace has been identified to be a cause of low back disorders. Epidemiologic data further supports an hypothesis that higher repetition rate (i.e. frequency) is an added risk factor. The objective of this study was to provide experimental data testing the above hypothesis. An in vivo feline model was subjected to 20-min of cyclic lumbar loading at frequencies of 0....

OBJECTIVE The purpose of this study was to determine the fracture strength of zirconium implant abutments and the torque required to unfasten the retaining screw before and after applying cyclic loading to the implant-abutment assembly. The dynamic behavior and stress distribution pattern of zirconium abutments were also evaluated. METHODS AND MATERIALS Static and cyclic loading of 7 XiVE imp...

Ultra High Molecular Weight Polyethylene (UHMWPE) is a polymeric material employed in critical biomedical applications. Knowledge of its mechanical behavior is essential in order to obtain accurate prediction of stresses and deformations in real components, in particular when cyclic loading is considered. In the present research the effects of alternating and pulsating cyclic strain on the mech...

Epidemiologic studies indicate that repetitive (cyclic) occupational activities lead to a cumulative trauma disorder (CTD), and the frequency or velocity of the movement is one of the risk factors. Experimental neurophysiological evidence to confirm the epidemiology is not available. The response of the multifidus muscles to cyclic loading in anterior lumbar flexion-extension was assessed to te...

Six formulas representing what is commonly referred to as “daily load stimulus” are identified, compared and tested in their ability to relate skeletal mechanical loading to bone maintenance and osteogenic response. Particular emphasis is placed on exerciseinduced skeletal loading and whether or not the formulas can adequately capture the known experimental observations of saturation of continu...

Tendinopathy affects individuals who perform repetitive joint motion. Magnetic resonance imaging (MRI) is frequently used to qualitatively assess tendon health, but quantitative evaluation of inherent MRI properties of loaded tendon has been limited. This study evaluated the effect of cyclic loading on T₂* values of fresh and frozen rabbit patellar tendons using ultra short echo (UTE) MRI. Eigh...