Tendinopathy affects individuals who perform repetitive joint motion. Magnetic resonance imaging (MRI) is frequently used to qualitatively assess tendon health, but quantitative evaluation of inherent MRI properties of loaded tendon has been limited. This study evaluated the effect of cyclic loading on T₂* values of fresh and frozen rabbit patellar tendons using ultra short echo (UTE) MRI. Eigh...

Although fatigue damage in bone induced by cyclic loading has been recognized as a problem of clinical significance, few fracture mechanics based studies have investigated how incipient cracks grow by fatigue in this material. In the present study, in vitro cyclic fatigue experiments were performed in order to quantify fatigue-crack growth behavior in human cortical bone. Crack-growth rates spa...

Title of Document: A NON-LINEAR DAMAGE MODEL WITH LOAD DEPENDENT EXPONENTS FOR SOLDERS UNDER SEQUENTIAL CYCLIC SHEAR LOADS Elviz George, Ph.D., 2015 Directed By: Professor Michael G. Pecht, Department of Mechanical Engineering The damage state of a material subject to cyclic loads is often characterized by the cycle ratio of applied cycles to the number of survivable cycles. The damage in a mat...

several relationships to assess at-rest pressure coefficient in retaining walls, have been developed by different researchers. these suggested relationships are generally a function of mechanical soil parameters such as internal friction angel, poison ratio and over-consolidation ratio. in integral bridges, however, this coefficient is also a function of many other parameters other than soil ch...

An assessment of the material properties of three types of touch and close fasteners (Velcro) in general orthopaedic usage is presented. The materials were tested under various loading regimes using an Instron testing machine. The force-extension curves were analyzed and values determined for both the stiffness and strength of the various attachments. Particular reference was made to the altera...

A load deflection and a cyclic loading apparatus capable of measuring dorsiflexion/plantarflexion, pronation/supination, internal/external rotation, and cyclic dorsiflexion (60 cycles per minute) of ankle-foot prostheses are described. A test protocol was developed to assess the functional parameters of the Jaipur ankle-foot prosthesis before and after prolonged cyclic loading, with the simulta...

The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...

The item deals with the possibilities of utilization HVOF coatings in thermal cyclic loading conditions. There were evaluated three types of coatings based on WC-Co, WC-Co-Cr and Cr3C2-25NiCr. The quality of coatings was evaluated in terms of their adhesion as sprayed and also during the cyclic thermal loading, EDX analysis and evaluation of microhardness. Construction and structure of coatings...

This article presents the strain-based experimental data for Ti-6Al-4V ELI under non-constant amplitude cyclic loading. Uniaxial strain-controlled fatigue experiments were conducted under three different loading conditions, including two-level block loading (i.e. high-low and low-high), periodic overload, and variable amplitude loading. Tests were performed under fully-reversed, and mean strain...

This study is to evaluate the behavior of integral and segmental specimens through static and cyclic tests. Integral specimens were made with the same size to be compared with segmental specimens that were made by connected precast members. To evaluate its bending performance and serviceability, 1 integral and 3 segmental specimens were tested under static load. And 1 integral and 2 segmental s...