The design and the optimization of structures with constrained layer damping (CLD) treatment requires an efficient numerical tool. The frame of this work is the modelling of thin constrained viscoelastic layers embedded in a massive structure meshed in 3D. A zero-thickness interface finite element is developed in order to model this viscoelastic layer, which enables to modify both its placement...

A fully instrumented air conditioning laboratory unit capable of controlling drying air temperature and humidity integrated with an instantaneous weighing thin layer drying system was used to investigate the thin layer drying behavior and desorption equilibrium moisture content of canola (Brassica napus L.). To this aim, freshly harvested canola samples with moisture content of about 12±0.5% (d...

OBJECTIVE We characterized electrode stability over twelve weeks of impedance and neural recording data from four chronically-implanted Utah arrays in two rhesus macaques, and investigated the effects of glial scarring and interface interactions at the electrode recording site on signal quality using a computational model. APPROACH A finite-element model of a Utah array microelectrode in neur...

Lifetime analysis of positronium annihilating in nanometer voids is used to study the thermal expansion behavior of thin, Si-supported polystyrene films near the glass transition temperature Tg. A reduction in void volume expansion is correlated with a reduction in the apparent Tg as film thickness decreases. Our results can be fitted using a three-layer model incorporating a 50 Å constrained l...

in this work, a more accurate prediction of liquid evaporation flux has been achieved. the statistical rate theory approach, which is recently introduced by ward and fang and exact estimation of vapor pressure in the layer adjacent to the liquid–vapor interface have  been used for prediction of this flux. firstly, the existence of an equilibrium layer adjacent to the liquid-vapor interface is c...

Electronic and structural properties of ultrathin MgO layers grown on epi-taxial Fe(110) films were investigated at room temperature by means of spin-resolved photoelectron spectroscopy, Auger-electron spectroscopy, and low energy electron diffraction. The spin polarization at the Fermi level of the Fe(110) film decreases abruptly with increasing thickness of MgO layer up to 7 ˚ A. This behavio...

Ultra-thin diamond-like carbon (DLC) coatings are used in precision engineering applications, such as magnetic storage devices, to protect intricate structures from wear and corrosion. A DLC coating typically consists of hard amorphous carbon in combination with an interlayer such as silicon (Si), to improve adhesion to the substrate material. Deformation and delamination of these coatings, eve...

We applied an axisymmetric model of the tibia to a finite element method and analyzed the heat conduction from bone cement in total knee arthroplasty using numerical simulation with the finite element analysis software, ABACUS. We hypothesized the thermal necrotic map of bone. Moreover, we suggested a method for preventing thermal necrosis of bone using this simulation. We adopted an initial te...

The role of metal layer thickness and resultant plastic constraint in the metal layer during the failure of metal/ceramic layered structures is examined under cyclic and static loading conditions. Crack-growth experiments were conducted on sandwich specimens consisting of 99.999% pure aluminum layers bonded between 99.5% pure polycrystalline alumina with the metal layer thickness varying from 5...

A tin oxide/copper phthalocyanine (CuPc) layer stack was investigated with two complementary photoemission methods. Non-destructive analysis of the electronic properties at the SnOx/CuPc interface was performed applying angle-dependent measurements with X-ray photoelectron spectroscopy (ADXPS) and energy-resolved photoemission yield spectroscopy (PYS). The different components (related to oxide...