Palm oil industries have been contributing significantly towards the country’s economy and increase standard of living among Malaysians. However, it has also been identified as the major contributor for discharging the largest pollution load throughout the country. Owing to high biochemical oxygen demand (BOD) and chemical oxygen demand (COD), the palm oil mill effluent (POME) cannot be dischar...

An anaerobic digestion of palm oil mill effluent (POME) for production of biogas was carried out at pilot scale under thermophilic condition. The objective of this research is to maintain short hydraulic retention time (HRT) and high degradation of the POME to biogas by applying recycle sludge. Fresh POME from PTPN IV without further treatment was used as feed. The fermentation process occurred...

Poly(3-hydroxybutyrate) [P(3HB)] homopolymer and poly(3-hydroxybutyrate-co-3hydroxyvalerate) [P(3HB-co-3HV)] copolymer was produced by Comamonas sp. EB172 using single and mixture of carbon sources. Poly(3-hydroxyvalerate) P(3HV) incorporation in the copolymer was obtained when propionic and valeric acid was used as precursors. Incorporation of 3HV fractions in the copolymer varied from 45 to 8...

To determine effects of pulp mill effluent on population genetic structure, redbreast sunfish (Lepomis auritus) were collected from several sites along the Pigeon River, NC, as well as from reference sites. Previous studies found effects on molecular, biochemical, physiological, population, and community level endpoints in these populations. The population genetic structure of these fish was de...

The treatment of paper mill effluent for COD, TOC, total phenols and color removal was investigated using combined activated sludge-ozonation processes and single processes. The combined activated sludge-O3/pH 10 treatment was able to remove around 80% of COD, TOC and color from Kraft E(1) effluent. For the total phenols, the efficiency removal was around 70%. The ozonation post treatment carri...

The purpose of this research is to study the effect of Fe concentration as a trace metal on the quality and quantity of biogas produced from the fermentation of palm oil mill effluent (POME). Raw POME as feed was obtained from one of the palm oil mills belong to PTPN IV, other materials used were hydrochloric acid, sodium bicarbonate, and trace metals. Observed variables were volume of biogas, ...

Abstract—A number of toxic chlorophenolic compounds are formed during pulp bleaching. The nature and concentration of these chlorophenolic compounds largely depends upon the amount and nature of bleaching chemicals used. These compounds are highly recalcitrant and difficult to remove but are partially removed by the biochemical treatment processes adopted by the paper industry. Identification a...

Corresponding Author: Randa M. Osman Chemical Engineering and Pilot Plant Department, National Research Centre, Cairo, Egypt Email: [email protected] Abstract: The waste considered for this study was the effluent of the pulping process produced during the manufacture of pulp and paper in the Rakta integrated pulp and paper mill in Alexandria. The pulping process in Rakta mill is condu...

Formation of slime deposits is a major problem facing paper industries. The slime may be biological or nonbiological. Biological deposits that are composed of varied microflora along with fibers, fillers and dirt are the most troublesome. Slime producing microbes secrete extracellular polysaccharides that gum up the process machinery. The specific nature of slime and its formation depend on the...

Large volumes of untreated palm oil mill effluent (POME) pose threat to aquatic environment due to the presence of very high organic content. The present investigation involved two pilot-scale anaerobic expanded granular sludge bed (EGSB) reactors, continuously operated for 1 year to treat POME. Setting HRT at 9.8 d, the anaerobic EGSB reactors reduced COD from 71179 mg/L to 12341 mg/L and recy...