are compared with the experimental results. In these test results the shape memory alloys behavior as: super elasticity under various temperatures, loading rate effects, asymmetry in tension and pressure, various loops of loading and unloading, hydrostatic pressure effects, different proportional tension-shear biaxial loading and unloading, and also deviation from normality due to non-proportio...

Eucalyptus regnans was subjected to thermal treatment. The samples were placed in superheated vapors at 120, 130, 140, 150, 160, 170, 180, 190, and 200 °C at ambient pressure to determine the effect of heat treatment on the physical-mechanical properties of Eucalyptus regnans. The results showed that heat treatment played an important role in the impact toughness, nail-holding ability, surface ...

objective: the purpose of this study was to evaluate the transverse strength of one brand of denture base material repaired with two autopolymerized acrylic resins with and without wire reinforcement. materials and methods: eighty samples (2.5×10×65 mm3) were fabricated and divided into five groups. the control group was left intact. groups b and d specimens were repaired with autopolymerizing ...

Abstract The paper presents the correlation between flexural strength and modulus of elasticity with respect to compressive ternary concrete (TC), made by incorporating Micro silica (5% 15%) Ground granulated blast furnace slag (20% 50%) considering w/b=0.55. A total twelve mixes one conventional mix were prepared identify optimum mix. Flow characteristics properties (compression, rupture elast...

STATEMENT OF PROBLEM Two problems found in prostheses with soft liners are bond failure to the acrylic resin base and loss of elasticity due to material aging. PURPOSE This in vitro study evaluated the effect of thermocycling on the bond strength and elasticity of 4 long-term soft denture liners to acrylic resin bases. MATERIAL AND METHODS Four soft lining materials (Molloplast-B, Flexor, P...

The paper reflects current state of popularization of static elasticity modulus of concrete. This parameter is undoubtedly very important for designing of concrete structures, and very often neglected and rarely determined before designing concrete technology itself. The paper describes assessment and comparison of four mix designs with almost constant dosage of individual components. The only ...

Abstract: The aim of the present investigation is to study the physical and mechanical characteristics of dental-filling spherical high-copper and silver amalgams and to compare them with a common high-copper domestic unicompositional amalgam. In this study, cylindrical specimens were mechanically condensed according to the ISO 1559:1986 Standard in order to measure the compressive strength, Vi...

Atomic force microscopy provides a novel technique for differentiating the mechanical properties of various cell types. Cell elasticity is abundantly used to represent the structural strength of cells in different conditions. In this study, we are interested in whether physical or physiological cues affect cell elasticity in Atomic force microscopy (AFM)-based assessments. The physical cues inc...