*Correspondence: Tadeusz Hryniewicz and Krzysztof Rokosz, Division of Surface Electrochemistry, Koszalin University of Technology, Raclawicka 15-17, Koszalin PL 75-620, Poland e-mail: tadeusz.hryniewicz@ tu.koszalin.pl; [email protected] The research work has been concerned on the studies and development of electrochemical polishing in the magnetic field magnetoelectropolishing (MEP) in com...

A robust process-controller was developed which maintains a fully penetrated weld. This feedback-controller is robust for various process disturbances that may occur, like variations in sheet thickness, welding velocity, focal position, shielding gas variations, etc. The signals from an optical sensor are used to design a so-called “switching” controller, which enables fully penetrated welding ...

The paper deals with the corrosion behavior of stainless steels as candidate materials for biofuel production plants by liquefaction process of the sorted organic fraction of municipal solid waste. Corrosion tests were carried out on AISI 316L and AISI 304L stainless steels at 250 °C in a batch reactor during conversion of raw material to bio-oil (biofuel precursor), by exposing specimens eithe...

The effects of boron on the grain boundary and surface energies in iron at 900 and 1000 OC and AISI 316 stainless steel in the temperature range 950-1 250 OC were investigated. It was found that boron reduced these energies in a manner typical of an element with low solubility in the matrix. It has been found that boron improves the grain boundary strength of iron at low temperatures [I] and in...

The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,...; even thou its also has week points like a low resistance to fire, weak against corros...

Austenitic stainless steels offer good property combinations for structural component applications in demanding and aggressive environments, including nuclear power plants, where irradiation assisted degradation failures have been reported [1]. Enhanced irradiation tolerance has been reported for materials containing a high density of internal interfaces that act as point defect annihilation or...

This report may be updated and revised periodically in response to the needs of the technical community; up-to-date versions can be requested from the editors at the address given below or downloaded at http://www.ca.sandia.gov/matlsTechRef/. The content of this report will also be incorporated into a Sandia National Laboratory report (SAND2008-1163); the most recent version can be obtained fro...

We have developed a method for forming carbon nanotubes (CNTs) directly on the surfaces of stainless steel materials that are important industrially. Using plasma-assisted chemical vapor deposition (PCVD), CNTs are formed at comparatively low temperatures, thus avoiding excessive annealing and degradation of the stainless steel. Because the catalytic metals needed for CNT formation are containe...