Alumina-rich iron ore is a widely existed polymetallic deposit in the nature, and it has a high comprehensive utilization value. Because the alumina and iron contents of alumina-rich iron ore vary from each other, there are many different measures and processes to recover iron and alumina from the various kinds of alumina-rich iron ore. In the blast furnace (BF) ironmaking process, the alumina ...

–The objective of present work is to use this industrial waste i.e. Slag as particulate filler material to the epoxy matrix composites by molding technique with different weight fractions ( 0%, 5%,10%,15%, 20% ) to study the mechanical behaviour of reinforced polymer composite material. The change in weight is studied for Slag under different tests like, tensile, bending and impact for obtainin...

(Received: November 27, 2010; Accepted: February 9, 2011) Abstract: The effect of pig iron slag particles on soil physico-chemical, biological and certain soil enzyme properties was studied. Contamination of iron slag particles altered physico-chemical, biological and enzyme properties of soil. While soil pH increased slightly, electrical conductivity, carbon, potassium and phosphorus contents ...

The surface tensions of a number of common commercial ferroalloys have been measured during their granulation in water. These measured values are significantly lower than would be expected from a normal metal-gas interface and are more typical of the interfacial tensions of slag-gas interfaces. This would seem to indicate that the slag-metal interface on the surface of a granule produces no sig...

In this study, ZnFe2O4 (ZFO) nanotapers are fabricated on the ZnO nanorods (NRs) by recycling rare-earth oxide (REO) slag as the iron source, which thereby exhibits dramatically enhanced photoelectrochemical (PEC) efficiency. Our studies demonstrate that the electron-hole separation and charge migration can be facilitated by the cascade band alignment of ZFO and ZnO and the branched nanotaper s...

Two types of refractory bricks were used in reaction tests with slag from a production kiln for iron ore pellet production. Electron microscopy was used to characterize morphological changes at the slag/brick interface and active chemical reactions. Phases such as kalsilite, nepheline and potassium β-alumina form, in a layered structure, as a consequence of alkali metals migration in the brick....

Different ways of combining argon oxygen decarburisation slag (AOD) or electric arc furnace slag (EAF) with blast furnace slag (BFS) for achieving better phosphorus (P) removal performance in small-scale wastewater systems (SSWSs) were examined. The three types of slag were combined in varying mass ratios and with different dosing procedures in batch experiments using synthetic solution and rea...

This study investigates the utilization of slag and fly ash (FA) as alternative cementitious binder. Combination of 60% slag and 40% FA was used as new binder. In addition, for activation of slag and FA, sodium hydroxide and calcium hydroxide was used as a chemical activator by 5% weight of the binder, separately. Water to binder and sand to binder ratios was kept 0.55 and 3 in mortar preparati...

A penetration process in electroslag welding is simulated using a two-dimensional smoothed particle hydrodynamics method to elucidate the heat transfer mechanism. The base metals are melted and forms orthogonal direction of weld line. From metal, molten metal flows downward, then pool below slag bath. distributions temperature increasing rates due conduction Joule heating also visualized clarif...