In this paper, a discontinuous conduction mode (DCM) frequency control algorithm is proposed to reduce the input current ripple of a multi-phase interleaved boost converter. Unlike conventional variable duty and constant frequency control, the proposed algorithm controls the switching frequency to regulate the output voltage. By fixing the duty ratio at 1/N in the N-phase interleaved boost conv...

With the advent of wireless microsensors and other microscale applications, switching supplies fully integrated on chip or into the package are desirable and often necessary. The problem with small inductors is that they exhibit low inductance and larger equivalent series resistance (ESR); in other words, they induce larger ripples in the output and higher conduction power losses. This brief pr...

The mathematical model of the equivalent circuit of a brushless DC motor switches during the operation due to commutation. This issue causes a sudden ripple in the output torque, which is called commutation torque ripple. Brushless DC motor drives suffer from commutation torque ripple, affecting the performance of the motor in practical applications. A discrete-time switched controller is propo...

Previous work has shown that sound penetration into sandy sediments at low grazing angles is greatly enhanced when ripples are present on the seafloor. The reasons for this phenomenon are still under investigation. To this end, a comprehensive understanding of ripple dynamics and their interaction with acoustic penetration into sediments has been sought in two recent initiatives: the Ripples DR...

Use of high frequency ripple control signals for load control purposes has existed for many years. Although the level of the injected signal at the zone substation is generally small, amplification can occur when the network resonant frequency is close to the injected ripple signal frequency. Ripple signal level at the injection point is generally 5 – 7V in magnitude with reference to public lo...

In this paper, a novel switched-capacitor DC-DC converter with pulse density and width modulation (PDWM) is proposed with reduced output ripple at variable output voltages. While performing pulse density modulation (PDM), the proposed PDWM modulates the pulse width at the same time to reduce the output ripple with high power efficiency. The prototype chip was implemented using 65 nm CMOS proces...

Abshacr Ripple correlation control can be applied to electric dr*e system in order to optimize some cost function independent of parameters. Tbis involves correlating the perturbations in the cost function with the perturbations in the independent variable to obtaim a command for the independent variable. The perturbations are normally due to ripple that is naturally prewnt in electric drive sy...

This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doubler boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Besi...

Since torque ripple is the main cause of noise and vibrations, the performance of Switched Reluctance Motor (SRM) can be improved by minimizing its torque ripple using a novel control technique called Direct Torque Control (DTC). In DTC technique, torque is controlled directly through control of magnitude of the flux and change in speed of the stator flux vector. The flux and torque are maintai...

Direct current (DC)-link voltage ripple analysis is essential for determining harmonic noise and for DC-link capacitor design and selection in single-phase pulse-width modulation (PWM) inverters. This paper provides an extensive theoretical analysis of DC-link voltage ripple for full-bridge (H-bridge) inverters, with simulation and experimental verifications, considering a DC source impedance (...