The present study is an attempt to find out the effect of environmental corrosion on the commonly used pearlitic rail steel. The cases of corrosion of rail under Indian environment have been studied. It has been found that in marine environment both the yield strength and tensile strength decreases with increasing corrosion rate. In acidic environment yield strength increased with increasing co...

Concrete corrosion is one of the most significant problems affecting valuable sewer infrastructure on a global scale. This problem occurs in the aerobic zone of the sewer, where a layer of surface corrosion develops on the exposed concrete and the surface pH is typically lowered from around 11-10 (pristine concrete) to pH 2-4. Acidophilic microorganisms become established as biofilms within the...

Potentiodynamic Pt/C fuel cell catalyst corrosion has been studied as a function of chloride concentration with an electrochemical flow cell (EFC) coupled with highly sensitive ICP-MS. The Pt corrosion mechanism changes significantly: the anodic corrosion is much enhanced compared to the cathodic corrosion that prevails in electrolytes without Cl(-).

In this research, a new type of corrosion monitoring technique for reinforce concrete was developed. The technique used piezoelectric sensors to detect the ultrasonic signals during corrosion. The mechanism of the method was presented. Experiment was carried out to monitor the corrosion process using piezoelectric sensors. The corrosion was also monitored using stain gauge for comparison.

The effect of recasting, up to two times, Ni-Cr (DUCINOX) prosthetic alloy on its corrosion properties was carried out. The corrosion measurements were done in deoxygenated Fusayama Meyer artificial saliva solution at temperature of 37°C. In the study following electrochemical methods were used: measurement of free corrosion potential Ecor in open circuit, measurement of polarization resistance...

Under badly environmental conditions as well as complex loads, corrosion of embedded reinforcing steel bars in concrete is common for reinforced concrete (RC) structures. Fatigue of corrosion reinforcing steel bars is a key problem for old RC bridges. To assess the residual fatigue life of aged existing RC bridges, the most new study information on fatigue of natural corrosion reinforcement is ...

The corrosion resistance of a Magnesium alloy is low and needs to be improved. This research aimed at corrosion-resistance improvement by supatterd deposition aluminium film, which is formed on the surface of AZ91 Magnesium-alloy. Corrosion resistance performed polarization curve measurement, was evaluated in quest of the corrosion rate using the Tafel extrapolation method, and conducted surfac...

The effects of ultrasonic-aided quenching (USQ) on the microstructure and corrosion properties of 35CrMoV steel in a simulated seawater environment (wt % (NaCl) = 3.5) were studied. The corrosion properties of the steel were studied by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves. The scanning electron microscope (SEM) and energy dispersive spectrometer (...

In order to control the corrosion in pipelines, it is important to understand the underlying corrosion mechanisms and predict ion of it’s initiation and means of mitigation. This paper reviews the electrochemistry of corrosion, it’s kinetics and thermodynamic nature, with respect to CO2 and H2S effects in propagating corrosion in oil and gas pipeline system. The phenomenon of polarization and i...

The electrochemical corrosion behavior of a silver-plated circuit board (PCB-ImAg) in a polluted marine atmosphere environment (Qingdao in China) is studied through a simulated experiment. The morphologies of PCB-ImAg show some micropores on the surface that act as the corrosion-active points in the tests. Cl- mainly induces microporous corrosion, whereas SO₂ causes general corrosion. Notably, ...