OBJECTIVES All ceramic restorations without metal have great advantages in their biocompatibility and aesthetic aspects. With the introduction of new core materials, the cores are sufficiently strong to produce long lasting all-ceramic restorations; however, the stresses in the veneering porcelain could still determine the longevity. The objective of this study was to evaluate, by finite elemen...

In this paper, we describe a solid freeform fabrication procedure for human dental restoration via porcelain slurry micro-extrusion. Based on submicron-sized dental porcelain powder obtained via ball milling process, a porcelain slurry formulation has been developed. The formulation developed allows the porcelain slurry to show a pseudoplastic behavior and moderate viscosity, which permits the ...

To elucidate the cause of brittleness of porcelain fused to pure titanium (PFPT) which leads to chipping and cracking similar to that of conventional porcelain in clinical use, fracture toughness KIc, hardness (Hv and Hk) and fracture energy gamma reflecting the bonding energy of atoms were evaluated. In KIc there were no differences between PFPT and conventional porcelain, nor for Hv and Hk, b...

The repair of a fractured porcelain surface with a resin composite was investigated. The effects of applying an opaque resin to porcelain surfaces, which were silanated by a ceramic primer from a repair kit or by an experimental silane coupling agent, were studied. The porcelain surfaces were silanated for 10 sec and 60 min. Three types of adherents were evaluated: opaque resin with light irrad...

Dental porcelain composites reinforced and toughened by 20 wt.% tetragonal zirconia (3Y-TZP) were processed by hot pressing at 1000°C. Two types of particles were tested: yttriastabilized zirconia (ZrO2–3%Y2O3) agglomerates and pre-sintered yttria-stabilized zirconia (ZrO2–3%Y2O3) particles. The composites as well as the reinforcing particles were analyzed by the means of optical and Scanning E...

We report a case of aortic stenosis with porcelain aorta using an apicoaortic valved conduit after 'aortic no touch' off-pump coronary artery bypass grafting. Apicoaortic valved conduit is a good surgical option for this patient to avoid re-entry through the sternum, injury to patent graft and manipulation of the porcelain ascending aorta.

PURPOSE The purpose of this study was to assess the impact of the core materials, thickness and fabrication methods of veneering porcelain on prosthesis fracture in the porcelain fused to metal and the porcelain veneered zirconia. MATERIALS AND METHODS Forty nickel-chrome alloy cores and 40 zirconia cores were made. Half of each core group was 0.5 mm-in thickness and the other half was 1.0 mm...

PURPOSE The purpose of this study was to investigate appropriate contrast reference values (CRVs) by comparing the contrast in phantom and clinical images. MATERIALS AND METHODS Phantom contrast was measured using two methods: (1) counting the number of visible pits of different depths in an aluminum plate, and (2) obtaining the contrast-to-noise ratio (CNR) for 5 tissue-equivalent materials ...

Objectives: Metal-ceramic restorations are the standard by which all esthetic restorations are measured. Fracture of dental restorations is a multifactorial problem, which is serious and costly. Debonding of porcelain from metal substructure and the bond strength depend on many factors. The purpose of this study was to determine whether or not the opaque porcelain thickness has a significant ef...