In this paper the results of the materials analysis of fluorocarbon (FC) films are presented. The properties of the fluorocarbon films are comparable to those of polytetrafluoroethylene (PTFE), better known under the trademarks such as teflon and fluon. The properties of PTFE are desirable for MEMS applications and enable new designs, new applications and new technological processing routes for...

Diamond-like carbon (DLC) is a metastable form of amorphous carbon having large sp 3 bonding. DLC films have unique properties such as high hardness, low-friction, good transparency in IR region, chemical inertness and biocompatibility. To have better performance of the coating one should have proper selection of different parameters for deposition. In the present study, DLC films were deposite...

Atmospheric plasma spraying (APS) is a well established process for preparing ceramic coatings. In this process, powder particles injected into the plasma jet are heated and accelerated simultaneously in the plasma stream and are deposited in molten or semi-molten droplets conditions onto a prepared substrate. During droplet impingement, these molten droplets rapidly solidify to form single spl...

Coatings have historically been developed to provide protection against corrosion and erosion that is to protect the material from chemical and physical interaction with its environment. Corrosion and wear problems are still of great relevance in a wide range of industrial applications and products as they result in the degradation and eventual failure of components and systems both in the proc...

This review considered various methods for depositing special modifying coatings on medical implants made of titanium alloys including techniques such as electrochemical deposition, sol–gel process, atmospheric plasma and PVD (magnetron sputtering vacuum arc deposition). The rationale is provided the use to improve performance efficiency implants. concept a functional multilayer coating designe...

CHARACTERIZATION AND CORROSION OF BCC-TANTALUM COATING DEPOSITED ON ALUMINUM AND STEEL SUBSTRATE BY DC MAGNETRON SPUTTERING by Chirag Joshi Tantalum is one of the most versatile highly refractory corrosion-resistant metals. Tantalum coating can be used as an effective corrosion barrier if it is continuous, free from defects and it adheres well to the substrate. A DC magnetron sputtering techniq...

Compressibility of liquid flame spray-deposited porous TiO2 nanoparticle coating was studied on paperboard samples using a traditional calendering technique in which the paperboard is compressed between a metal and polymer roll. Surface superhydrophobicity is lost due to a smoothening effect when the number of successive calendering cycles is increased. Field emission scanning electron microsco...

This study investigates the formation of a chromate conversion coating at Al-Cu-Fe-Mn intermetallic sites of an Al2219 alloy and the corrosion initiation at these sites in a 3.5 % NaCl solution, using SEM, AES and EDX. Changes in the surface chemistry were monitored after progressive exposures to the solution up to 42 hours. The coating was found to be thinner and more defective on the intermet...