The aim of this study was to evaluate the performance a reverse osmosis (RO) membrane in surfactant removal using various model aqueous solutions. separation tests were performed with laboratory scale units dead-end configuration. Cellulose Acetate (CA) and Polyamide (PA) RO membranes used nonionic, anionic, or cationic surfactants at wide range concentrations. Membrane evaluated permeate flux ...

Petroleum transformation industries have applied membrane processes for solvent and hydrocarbon recovery as an economic alternative to reduce their emissions and reuse evaporated components. Separation of the volatile organic compounds (VOCs) (toluene-propylene-butadiene) from air was performed using a poly dimethyl siloxane (PDMS)/α-alumina membrane. The experimental set-up followed the consta...

Retention characteristics of UF membranes are de— lineated through comparison of the combined viscous flow and frictional model with the Ferry—Faxen equation. The molecular weight cut—off concept is discussed using calculations of how sharp cut-off curves one can expect of UF membranes with uniform pore sizes and how heteroporosity will affect such curves. Experimental retention—flux curves for...

Currently, biological method has been utilized in the treatment of wastewater -containing synthetic dyes used by textile industries in Iraq. The present work was devoted to study the operating feasibility using reverse osmosis (RO) and nanofiltration (NF) membrane systems as an alternative treatment method of wastewater discharged from Iraqi textile mills. Acid red, reactive black and reactive ...

A palladium membrane was prepared using the electroless plating technique (ELP) for the separation and purification of hydrogen from a gas mixture. Depending on operating conditions, hydrogen flux from the membrane was in the range of 0.012-0.023 mol.m-2.s-1. The membrane performance in the presence of CO2 was investigated. The results of the GC analysis showed that at a feed concentration of 1...

This study addresses the possibility for low pressure reverse osmosis membrane (RE 2521, CSM) process to serve as an alternative to remove selected antibiotics (ampicillin and amoxicillin) from synthetic wastewater by changing operating conditions such as pH = 3, 6.5 and 10; Pressure = 9, 11 and13 (bar); antibiotic concentration = 10, 255 and 500(mg/L), and temperature = 20, 30 and 40°C. The ex...