the purpose of this study is to improve the aerodynamic performance of wind turbine blades, using the ball-spine inverse design method. the inverse design goal is to calculate a geometry corresponds to a given pressure distribution on its boundaries. by calculating the difference between the current and target pressure distributions, geometric boundaries are modified so that the pressure differ...

in high-pressure axial turbines, when the fluid mass flow is low, the supersonic blades are being used to obtain a high specific work output. to prevent losses due to low blade aspect ratio, the turbine is used in partial admission conditions. the turbine stator is a group of convergence-divergence nozzles that provides the supersonic flow. the design of these nozzles is important, because ther...

An isolated small wind turbine emulator based on a separately excited DC motor is developed to evaluate the performance of small wind turbine control strategies. The test rig consists of a 3HP separately excited DC motor coupled to a synchronous generator. A dump load is connected to the generator through a buck-boost converter controlled by a microcontroller. Wind turbine rotor and furling dyn...

We have developed a new wind turbine system that consists of a diffuser shroud with a broad-ring brim at the exit periphery and a wind turbine inside it. The shrouded wind turbine with a brimmed diffuser has demonstrated power augmentation by a factor of about 2–5 compared with a bare wind turbine, for a given turbine diameter and wind speed. This is because a low-pressure region, due to a stro...

High-pressure air enters the air-turbine of the dental handpiece and strikes the blades to drive the impeller. The air-turbine has impeller and the air tube is connected to the air-turbine housing. The flowfield of the air-turbine were investigated for the optimum air-turbine design using ANSYS CFX. The objective of the research was to find an optimum design variables for the air-turbine to inc...

Wake recovery constrains the downstream spacing and density of turbines that can be deployed in turbine farms and limits the amount of energy that can be produced at a hydrokinetic energy site. This study investigates the wake recovery at the downstream of a 1:10 axial flow turbine model using a pulse-to-pulse coherent Acoustic Doppler Profiler (ADP). In addition, turbine inflow and outflow vel...

In the background of the offshore wind turbine monitoring applications, we analyzed the characteristics of the offshore wind turbine monitor and gave the architecture of the offshore wind turbine monitor system. We designed the system model of blade wear and vibration in offshore wind turbine, and combined with energy efficient data aggregation algorithm based on the specific application to mon...