Self-assembled foam-like graphene (SFG) structures were formed using a simple nucleate boiling method, which is governed by the dynamics of bubble generation and departure in the graphene colloid solution. The conductivity and sheet resistance of the calcined (400°C) SFG film were 11.8 S·cm(-1) and 91.2 Ω□(-1), respectively, and were comparable to those of graphene obtained by chemical vapor de...

A study of nucleate boiling phenomena on nano/microstructures is a very basic and useful study with a view to the potential application of modified surfaces as heating surfaces in a number of fields. We present a detailed study of boiling experiments on fabricated nano/microstructured surfaces used as heating surfaces under atmospheric conditions, employing identical nanostructures with two dif...

Flow boiling of HFE 7000 in five parallel microchannels of 222 m hydraulic diameter, each containing a single row of 24 in-line 100 m pin fins, was investigated. High speed photography revealed the dominant flow patterns, namely, the bubbly flow, the multiple flow, and the wavy-annular flow. The interaction of the bubble with the pin fins during nucleate boiling from G 350 kg /m2 s to G 827 kg ...

A characteristic length scale and a time scale are proposed to describe the dynamic growth and departure process of bubbles. A correlation between bubble departure diameter and bubble growth time is established thereby, and a predication formula for bubble departure diameter is suggested by considering the analogue between nucleate boiling and forced convection. # 1999 Published by Elsevier Sci...

The production of machine parts usually ends with some kind of a heat treatment. A proper heat treatment, like quenching, provides increased surface hardness, which improves wear resistance. The quenching process must be fast to achieve the required hardness, but not too fast to prevent surface damage. Monitoring of the quenching process in real time, and an appropriate control can improve the ...

This study examines the single-phase and two-phase cooling performance of a hybrid micro-channel/micro-jet impingement cooling scheme using HFE 7100 as working fluid. This scheme consists of supplying coolant from a series of jets that deposit liquid into the micro-channels. A single-phase numerical scheme that utilizes the k–e turbulent model and a method for determining the extent of the lami...

The literature pertinent to various aspects of drop evaporation on a heated surface is reviewed. Both the laser shadowgraphic and direct photographic methods are employed to study thermal stability and flow structures in evaporating drops in all heating regimes. It is revealed that four flow regions exist in stable and unstable type drops at low liquid-film type vaporization regime. As the surf...

The effects of chip protrusion on the forced-convection boiling and critical heat flux (CHF) of a dielectric coolant (FC-72) were investigated. The multi-chip module used in the present study featured a linear array of nine, 10mm x 10 mm, simulated microelectronic chips which protruded 1 mm into a 20-mm wide side of a rectangular flow channel. Experiments were performed in vertical upflow with ...

The present paper is an experimental investigation of roughness effects on nucleate pool boiling of refrigerant R113 on horizontal circular copper surfaces. The copper samples were treated by different sand paper grit sizes to achieve different surface roughness. The average surface roughness of the four samples was 0.901, 0.735, 0.65, and 0.09, respectively. The experiments were performed in t...

The process of sunspot formation is considered with the account of heat effects. According to the Le Chatelier principle, a local overheating must precede to the cooling of solar surface in the places of sunspot formation. The sunspot dynamics is a process close to the surface nucleate-free boiling in a thin layer with formation of bubbles (or craters), so we focus on the analogy between these ...