In this study, a non-contact type intraocular pressure (IOP) measuring system using reflected pneumatic pressure is proposed to overcome the disadvantages of existing measurement systems. A ring-type nozzle, a key component in the proposed system, is designed via computational fluid analysis. It predicts the reflected pneumatic pressure based on the nozzle exit angle and inner and outer diamete...

The assurance of the reliability for the transformation substations is one of primary goals of the manufacturers and distributors of electricity. Therefore, a proper monitoring and maintenance program is required. The circuit breaker is a complex device, subject to the thermal and mechanical stresses during the normal or fault currents switching. The substations are frequently equipped with SF6...

Abstract The present study aims at characterizing the atomization of a water jet which is injected at high velocity into still air thanks to an industrial nozzle particularly used in irrigation. The nozzle diameter is 4.36 mm and exit velocity is about 25 m/s. The droplet size and velocity are analyzed by a double-pulsed shadowgraph imaging technique using a Droplet Tracking Velocimetry (DTV) m...

The transport of droplets in a pressure-atomized kerosene spray flame was examined using a twocomponent phase Doppler system to measure the droplet size and velocity distributions at several locations within the spray. The effect of combustion on droplet transport was examined by comparing the results to a nonburning spray under similar flow conditions. Directions of motion of droplets are calc...

A wear sensor system for direct and almost on-line tracking the wear of an abrasive waterjet (AWJ) nozzle is proposed. The wear sensor is based on the conductive loops which will be placed on the ceramic's substrate and embedded on the tip of the nozzle. At the heart of this wear sensor systeln is a wear sensor probe which includes conductive loops divided into four sections. In thil arrangemen...

An experimental investigation is performed to explore the characteristics of sprays produced by a liquid-liquid coaxial swirl injector in a non-combusting environment. Phase Doppler anemometry is used for the measurement of velocity and Sauter mean diameter of droplets across and along the injection axis for various innerand outer mass flow rates. Results of the combined spray are compared with...

To show the effects of the particles and forced disturbances on the instantaneous large-scale vortex structures in a gas-particle round jet, coherent structures in gas-particle turbulent round jets were investigated experimentally by flow visualization. The 45m and 350m diameter glass beads were used as the particles in the experiments. An acoustic speaker was used to introduce velocity perturb...

We present an experimental analysis of the effects of gravity level on the formation and rise dynamics of bubbles. Experiments were carried out with millimeter-diameter bubbles in the hypergravity environment provided by the large-diameter centrifuge of the European Space Agency. Bubble detachment from a nozzle is determined by buoyancy and surface tension forces regardless of the gravity level...