The adsorption of phosphorus (P) onto three industrial solid wastes (fly ash, red mud and ferric-alum water treatment residual (FAR)) and their modified materials was studied systematically via batch experiments. Compared with two natural adsorbents (zeolite and diatomite), three solid wastes possessed a higher adsorption capacity for P because of the higher Fe, Al and Ca contents. After modifi...

Molybdenum adsorption behavior was investigated on various crystalline and x-ray amorphous Al and Fe oxide minerals, clay minerals, CaC@, and arid-zone calcareous and noncalcareous s soils. Molybdenum adsorption on botb Al and Fe oxides exhibited a maximum at low pH extending to about pH 4 to 5. Above pH 5 adsorption decreased rapidly, with little adsorption occurring above pH 8. Molybdenum ads...

conclusions the findings of this study showed that the modification of natural zeolites can achieve higher adsorption capacity for organics. in addition, based on the results, natural zeolite being modified with sds as a cationic surfactant had good efficiency for the adsorption of nom. results the results indicated that sds-modified zeolite showed greatly enhanced adsorption capacity. findings...

The adsorption of 1-naphthol (NAP) in aqueous solution was investigated using unmodified and modified diatomite at different temperature, pH, adsorbent mass and contact time. The adsorption capacity of the modified diatomite significantly improved (about 2 times at 298 K) compared to the unmodified diatomite. The adsorption showed a good fit with the Langmuir model. The further data analysis de...

This work reports the adsorption of crystal violet (CV) dye onto magnetic zeolite (MZ) nanoparticles, synthesized by direct fusion of fly ash (FA) and magnetite particles. The synthesised MZ showed high capacity for CV dye adsorption, removing 95% of the dye at an equilibrium adsorption time of 10 min and 25 ̊C. The effects of adsorbent dosage, dye concentration, and pH, on adsorption were evalu...

Novel adsorption gel was prepared from orange juice residue by using boiling concentrated sulfuric acid to create a condensation cross-linking reaction. It was then loaded with Zr(IV) ion to create adsorption sites for fluoride ions. This prepared gel was characterized by IR, EDX, XRD, SEM and chemical analysis. Fluoride adsorption was strongly pH dependent and maximum adsorption occurred at pH...

The effects of chemical and structural surface heterogeneity on the CH4 adsorption behaviour on microporous carbons have been investigated using a hybrid theoretical approach, including the use of density functional theory (DFT), molecular dynamics (MD), and grand canonical Monte Carlo (GCMC) simulations. Bader charge analysis is first performed to analyze the surface atomic partial charges. Th...

In the present work, superparamagnetic iron oxide nanoparticles (SPION) surface-coated with 3-mercaptopropanoic acid (3-MPA) were prepared and their feasibility for the removal of arsenate from dilute aqueous solutions was demonstrated. The synthesized 3-MPA-coated SPION was characterized using transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Fourier transform infra-...

Adsorption behavior of unburned carbons from fly ash has been investigated in this study. Batch tests and column test were carried out for several unburned carbon samples from various ash sources and processing schemes. Adsorption isotherms have been obtained from these tests. Results show that the unburned carbons have equal or better adsorption capacity for elemental mercury comparing with so...

−Three kinds of biochars (called poplar branch biochar (PBC), water hyacinth biochar (WHC), and corn straw biochar (CSC)) were prepared in a fixed-bed pyrolyzer at different pyrolysis temperature of 300-700 C. The effects of biochar species, pyrolysis temperature and biochar addition on adsorption characteristics of typical heavy metals (HMs) of Pb and Zn in vegetable soil (collected from lead-...