Aluminum-based alloy composites with high strength and low density can be used in corrosive environments. In this research, the nano-powders of A16061 alloy and A16061/TiB2 composite were synthesized by mechanical alloying (MA) method. Then, A16061 /TiB2 nano-composite bulk samples were prepared at laboratory scale by hot extrusion approach. Transmission electron microscopy (TEM) and X-ray diff...

Al2O3 ceramic reinforced with 4-wt% multiwalled carbon nanotube (CNT) is plasma sprayed for improving the fracture toughness of the nanocomposite coating. Two different methodologies of CNT addition have been adopted in the powder feedstock to assist CNT dispersion in the nano-Al2O3 matrix. First, spray-dried nano-Al2O3 agglomerates are blended with 4 wt% CNT as powder-feedstock, which is subse...

Ceramic micro-stereolithography (mSL) was recently introduced in the fabrication of complex 3D ceramic microstructures. Light scattering is found as an important factor in the mSL of ceramics. In this work, the Monte Carlo ray tracing method is employed to investigate the in¯uences of the important materials properties on the scattering during the ceramic mSL. It is found that the scattering is...

Synthesis of nano-crystalline alumina powder by a chemical pyrophoric reaction using citric acid and ammonia was investigated by varying the pH of the precursor solution, which played an important role in controlling the morphology of the synthesised powder. The flaky morphology obtained at pH = 2 could be modified to fine desegregated particulate form by varying the pH of the solution to 10. T...

Nano-sized ceramic particle reinforced aluminum composites exhibit excellent room-temperature mechanical properties. However, there is limited research on the dry sliding wear behavior of those composites at elevated temperatures, which should be one of the major concerns on elevated temperature applications. Here the Al-Cu composites reinforced with nano-sized TiCp were fabricated. The dry sli...

The Three Dimensional Printing (3DP) Process hasbe~nadapted for processing of fine ceramic powders to •• prepare structllraLceramic components. Our preliminary study was designed to reveal those aspects ofthe.3DPprocesswhichmust be modified for use with fine ceramic powders. The basic elements of the modified process are to spread submicron alumina powder and printJatex binder. Several methods ...

In this study, the gas-sensing properties of nanocrystalline TiO 2 are enhanced by submitting the sensor system to UV light irradiation. TiO 2 gas sensing material based on nanosized particles is produced by gas condensation method. The crystal structure and ceramic microstructure of the powders are determined by TEM and XRD. Structural and morphological studies as well as UV irradiation are ca...

Calcium phosphates (CaPs), extensively used synthetic bone graft substitutes, are often combined with other materials with the aim to overcome issues related to poor mechanical properties of most CaP ceramics. Thin ceramic coatings on metallic implants and polymer-ceramic composites are examples of such hybrid materials. Both the properties of the CaP used and the method of incorporation into a...

Highly porous bioactive glass-ceramic scaffolds were effectively fabricated by an inorganic gel casting technique, based on alkali activation and gelification, followed by viscous flow sintering. Glass powders, already known to yield a bioactive sintered glass-ceramic (CEL2) were dispersed in an alkaline solution, with partial dissolution of glass powders. The obtained glass suspensions underwe...