Gas metal arc welding has been generally accepted as the preferred joining technique due to its advantages in high production and automated welding applications. Separate control of arc energy and arc force is an essential way to improve the welding quality and to obtain the projected metal transfer mode. One of the most eVective methods for obtaining separate control is to exert an additional ...

Zirconium-based alloys are widely used in the field of nuclear industry as cladding for nuclear fuel in power plants. In a pressurized water reactor (PWR), boric acid is added in the coolant for reactivity control. Lithium hydroxide is added to render the coolant slightly alkaline, which helps to inhibit corrosion product deposition on the fuel cladding and reduces the corrosion rate of structu...

Ni-based alloy powders with different contents of cobalt (Co) have been deposited on a 42CrMo steel substrate surface using a fiber laser. The effects of Co content on the microstructure, composition, hardness, and wear properties of the claddings were studied by scanning electron microscopy (SEM), an electron probe microanalyzer (EPMA), X-ray diffraction (XRD), a hardness tester, and a wear te...

Missing pellet surface (MPS) defects are local geometric defects in nuclear fuel pellets that result from pellet mishandling or manufacturing. The presence of MPS defects can cause clad stress concentrations that are substantial enough to produce through-wall cladding failure for certain combinations of fuel burnup, and reactor power level or power change. Consequently, the impact of potential ...

The thermophysical performance and solid mechanics behavior of UO2-36.4vol % BeO fuel pellets cladded with Zircaloy, SiC, and FeCrAl, and Zircaloy cladding materials coated with SiC and FeCrAl, are investigated based on simulation results obtained by the CAMPUS code. In addition, the effect of coating thickness (0.5, 1 and 1.5 mm) on fuel performance and mechanical interaction is discussed. The...

At the completion of the fuel drying process, used fuel Zry4 cladding typically exhibits a significant population of d-hydride inclusions. These inclusions are in the form of small platelets that are generally oriented both circumferentially and radially within the cladding material. There is concern that radiallyoriented hydride inclusions may weaken the cladding material and lead to issues du...

To increase the power density and maximum allowable fuel burnup in light water reactors, new fuel rod designs are investigated. Such fuel is desirable for improving the economic performance light water reactors loaded with transuranic-bearing fuel for transmutation, as well as those using UO2 fuel. A proposal for using silicon carbide duplex as fuel cladding is investigated. The cladding consis...

Current standardized testing on air-permeable multilayer cladding is inaccurate since one of the primary parameters for setting the peak net wind loads across the cladding is the external pressure gradient, which is removed from all standardized testing. After implementing a latex-barrier system and examining the control strategy for the pressure loading actuators, a multichamber airbox system ...

We present a full-vectorial modal analysis of a segmented cladding fiber (SCF). The analysis is based on the H-field vectorial finite element method (VFEM) employing polar mesh geometry. Using this method, we have analyzed the circular SCF and the elliptical SCF. We have found that the birefringence of the circular SCF is very small (1.0×10(-8)). Birefringence of a highly elliptical SCF can be ...