Steel ball indentation and scratch adhesion testing of hot filament chemical vapour deposited diamond films onto AISI type 316 austenitic stainless steel substrates using two different interlayer systems, namely chromium nitride and borided steel, have been investigated. In order to compare the adhesion of these films with that of a well-known and strongly adherent system, detailed adhesion tes...

Laser Powder Bed Fusion (LPBF) printing is used for manufacturing conformal cooling injection molds with internal channels. Currently, the steel to manufacture such by LPBF maraging 18Ni300. However, this softer at high temperatures and less resistant corrosion than reference steel, AISI H11. Moreover, 18Ni300 contains cobalt, an element that can be harmful health of people handling powders mad...

The very thin native oxide film on stainless steel, of the order of 2 nm, is known to be readily modified by immersion in aqueous media. In this paper, XPS and ToF-SIMS are employed to investigate the nature of the air-formed film and modification after water emmersion. The film is described in terms of oxide, hydroxide and water content. The preferential dissolution of iron is shown to occur o...

long–term stability and oxidation resistance of aisi 439 ferritic stainless steel used as interconnects in solid oxide fuel cells can be improved by use of a protective coating. in this study the pack cementation method was employed to coat aisi 439 ferritic stainless steel with manganese. isothermal oxidation was conducted at 800 ºc for 200 hours in static air to investigate the role of coatin...

austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. in the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed aisi 304l stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. for this purpose, samples were subjec...

To measure the cleanability of stainless steel surfaces under standardized conditions, a test stand was set up. Three stainless steel plates (size 200 x 100 mm) can be fixed to the test stand and sprayed with a water jet from a low-pressure nozzle for a period of several minutes. The plates were previously soiled with a starch or protein film with a pre-defined layer thickness and dried for sev...

This work reports on the influence of β-lactoglobuline (β-LGB) and of its denaturation on the adherence of quartz particles, taken as a model of particulate soil, on stainless steel AISI 304 with mirror finish. The substrate was soiled with quartz suspensions in water or in β-LGB solutions as such or previously heated at 75°C, and dried at room temperature or in an oven at 75°C. Cleanability wa...