This work aims to study the removal of Cu(II) and Cr(VI) from aqueous solutions with commercial coffee wastes. Materials with no further treatment such as coffee residues from café may act as adsorbents for the removal of Cu(II) and Cr(VI). Equilibrium data were successfully fitted to the Langmuir, Freundlich and Langmuir-Freundlich model (L-F). The maximum adsorption capacity of the coffee res...

This study investigates the effect of surface acidity and basicity of aluminas on asphaltene adsorption followed by air oxidation. Equilibrium batch adsorption experiments were conducted at 25°C with solutions of asphaltenes in toluene at concentrations ranging from 100 to 3000 g/L using three conventional alumina adsorbents with different surface acidity. Data were found to better fit to the F...

ABSTRACT: Excess fluoride ion (F) in drinking water causes harmful effects such as dental and skeletal fluorosis. Hence, its concentration in drinking water must not exceed a certain range. This study investigated the removal of F from aqueous solutions with CuO nanoparticles using a range of experimental approaches, including pH, adsorbent dose, contact times, and initial F concentration. The ...

Polyaniline/cerium oxide (PANI/CeO2) composites were prepared and characterized by XRD, FT-IR, nitrogen adsorption/desorption isotherms and TEM techniques. The PANI/CeO2 composites were used for removal of Remazol Red (RB-133) from aqueous solution. The adsorption behaviour of dye was studied at different experimental conditions of solution pH and reaction temperature. The adsorption isotherm s...

Biosorption is most economical method for removing toxic metals from waste water.The paper presents the results of studies carried out on sorption of zinc ions from aqueous solutions by a coffee industry waste s a low-cost sorbent. It was found that crushed coffee industry waste possess relatively high sorption capacity as 46.05 mg/g, when comparing with other sorbents. The biosorption studies ...

-Well-characterized American Petroleum Institute clay standards, source clays from The Clay Minerals Society, and other secondary minerals were used to determine the effects of U concentration, temperature, and solution composition on U-sorption properties. Uranium concentrations ranged from about 1.00 x 10 -4 M to 4.00 x 10 7 M, temperatures from 5 ~ to 65~ and solution compositions containing...

In this research by equilibrium adsorption isotherms of vitamin B2 (Ribo Flavin) on carbon nano-tubes having the multi wall through several discontinues method has been studied.with the help of spectro photometer (UV / VIS) adsorption chart based on the wavelength of vitamin B2 has been obtained, and the relevant graph is plotted .by considering factor of concentration, the concentration necess...

Removal of cesium from synthetic aqueous solution through adsorption on bentonite, under batch equilibrium experimental condition at different values of pH and four temperatures (303, 313, 323, 333 K) was investigated. For this propose the suitability of the Freundlich adsorption model for equilibrium data were investigated. The parameters in the adopted adsorption isotherm models were determin...