water and energy are key commodities utilized in the process industries.water minimization and energy minimization have been studied separately. in this paper, a new systematic design methodology has been developed for the simultaneous management of energy and water systems that also feature maximum re-use of water. in addition to allowing re-use of water, issues about heat losses inside unit o...

The paper discusses optimal operation of a general heat exchanger network with given structure, heat exchanger areas and stream data including predefined disturbances. A formulation of the steady state optimization problem is developed, which is easily adapted to any heat exchanger network. Using this model periodically for optimization, the operating conditions that minimize utility cost are f...

The objective of this paper is to evaluate and optimize the performance of 1 kW integrated heat exchanger module for new generations of air cooled heat exchangers. The first objective is to minimize the ratio of the header frontal area to the entire heat exchanger frontal which will help to reduce the header size. The second objective is to minimize the pressure drop for the entire heat exchang...

In industrial environments, the heat exchanger is a necessary component to any strategy of energy conversion. Much of thermal energy used in industrial processes passes at least one times by a heat exchanger, and methods systems recovering thermal energy. This survey paper tries to presents in a systemic way an sample control of a heat exchanger by comparison between three controllers LQR (line...

one way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. in the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. in this work, the performance of water / iron oxide nanofluid in a double...

Temperature of fluid stream through tube is a key variable in shell and tube heat exchanger. However, this variable is not easy to measure straightly. Therefore, a state observer is designed to estimate the tube temperature variable for direct control of shell and tube heat exchanger. A dynamical state space model is used to describe the heat exchanger process. Kalman filter based observer is d...

Abstract—Liquid spray heat exchanger is the critical equipment of temperature regulating system by gaseous nitrogen which realizes the environment temperature in the range of -180 °C~+180 °C. Liquid nitrogen is atomized into smaller liquid drops through liquid nitrogen sprayer and then contacts with gaseous nitrogen to be cooled. By adjusting the pressure of liquid nitrogen and gaseous nitrogen...

0017-9310/$ see front matter 2010 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2010.09.029 ⇑ Corresponding author. Tel.: +1 765 494 5705; fax E-mail address: [email protected] (I. Mud This study explores the use of a high-pressure metal hydride (HPMH), Ti1.1CrMn, to store hydrogen at high pressures (up to 310 bar) and temperatures below 60 C, conditions that are suitable for automobile...

The performance of the adsorption cooling system is assessed in terms of the heat transfer coefficients of adsorbent bed heat exchanger. These parameters in-turn determine the specific cooling capacity (SCC) and the coefficient of the performance (COP) of the adsorption cooling system. It was observed that the overall heat transfer coefficients of the heat exchanger have a direct linear relatio...

This study explores the endothermic dehydriding (desorption) reaction that takes place in a high-pressure metal hydride (HPMH) hydrogen storage system when hydrogen gas is released to the fuel cell. The reaction is sustained by circulating warm fluid through a heat exchanger embedded in the HPMH powder. A systematic approach to modeling the dehydriding process is presented, which is validated a...