Natural gas is the most popular fossil fuel in the current era and future as well. Natural gas is existed in underground reservoirs so it may contain many of non-hydrocarbon components for instance, hydrogen sulfide, nitrogen and water vapor. These impurities are undesirable compounds and cause several technical problems for example, corrosion and environment pollution. Therefore, these impurit...

The conversion of methane via an OCM (Oxidative Coupling of Methane) to transportable liquid fuel has been investigated in order to utilize remote natural gas effectively. A conceptual view of this new process was developed for gasoline production based on reviews of other conventional processes and sensitivity analyses. The process developed, "ORIGINAL". is characterized by simplification of t...

Pyrolysis of low density polyethylene (LDPE) by equilibrium fluid catalytic cracking (FCC) was studied in a stirred reactor under different process parameters. In this work, the effect of process parameters such as degradation temperature (420-510°C), catalyst/polymer ratio (0-60%), carrier gas type (H2, N2, ethylene, propylene, Ar and He), residence time and agitator speed (0-300 rpm) on the c...

Membrane processes are today one of the key technologies for industrial gas separations and show growing interest for future use in sustainable production systems. Besides materials development, dedicated engineering methods are of major importance for the rigorous and most efficient design of membrane units and systems. Starting from approaches based on simplified hypotheses developed in the 5...

Gravity drainage is one of the important recovery mechanisms in fractured carbonate and conventional reservoirs. It occurs due to density difference between the gas in fracture and the oil in matrix as well as in conventional tilted reservoirs. Oil phase will form films which are produced under gravity forces (film flow). Many gas injection experiments have been done on laboratory scales with d...

Self-aligning soldering technology is being developed for low cost, passive, precision optical alignments. To avoid contamination problems, the solder reflow process must use reacting or inert gas instead of chemical flux materials. Since the accuracy of these optical alignments should reach the range of a few micrometers (μm), the gas flow may affect the aligning process. Therefore, the effect...

In this work, sweeping gas membrane distillation (SGMD) process was used for concentrating of glucose syrup. The main questions in this work include: is SGMD process practical for concentrating of glucose solution prior the fermentation step in bioethanol process?. and are the commercially available hydrophobic membranes sufficient enough to develop the SGMD process in pilot scale for this issu...

Gas quenching is a relatively new process with several important advantages, such as minimal environmental impact, clean products, and ability to control the cooling locally and temporally for best product properties. To meet the high cooling rates required for quenching, the cooling gas must flow at very high velocities, and such flows are highly turbulent and separated. Consequently, there is...