In order to maintain cab comfort truck drivers have to idle their engine to obtain the required power for accessories, such as the air conditioner, heater, television, refrigerator, and lights. This idling of the engine has a major impact on its fuel consumption and exhaust emission. Idling emissions can be as high as 86.4 g/h, 16,500 g/h, 5130 g/h, 4 g/h, and 375 g/h for HC, CO2, CO, PM, and N...

In the present study emission performance of a diesel engine (Lister Petter) was evaluated at different compression ratios and engine loads with soybean methyl ester and its 25%, 50%, 75% blends with diesel fuel at constant speed 1500 rpm. Exhaust emissions included CO, CO2, HC and NOx. The compression ratio and engine load varied from 14 to 20 with an interval 1 and 25 to...

Start of fuel injection and fuel type are two important factors affecting engine performance and exhaust emissions in internal combustion engines. In the present study, a one-dimensional computational fluid dynamics solution with GT-Power software is used to simulate a six-cylinder diesel engine to study the performance and exhaust emissions with different injection timing and alternative fuels...

Increased energy demand and the concern about environment friendly technology, renewable bio-fuels are better alternative to petroleum products. In the present study linseed oil was used as alternative source for diesel engine fuel and the results were compared with baseline data of neat diesel. Performance parameters such as brake thermal efficiency (BTE) and brake specific fuel consumption (B...

The challenge for Automobile is present emission norms that demands engine for green environment with high performance and low emission. The Low Heat Rejection Engine (LHR Engine) is a technology, which minimizes heat loss to the coolant by providing heat resistance in the heat flow to the coolant. As LHR Engine is used, the heat is not transferred to the surroundings. Another method to improve...

In the current work, a comprehensive study on the possibility of using methanol as an alternative fuel for diesel engines was carried out. Methanol was mixed at different ratios with diesel fuel. The mixing ratios of methanol to diesel were 0:100, 10:90, 20:80 and 30:70. The effects of methanol fraction on engine power, torque, brake specific fuel consumption (BSFC), brake thermal efficiency an...

Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...

This study discusses the suitability of iso-butanol/diesel fuel blends as an alternative fuel and determines their effects on the performance and combustion characteristics of a heavy-duty diesel engine. For this purpose, various isobutanol/diesel fuel blends containing 5%, 10% and 15% iso-butanol were prepared in volume basis and tested in a turbo-charged, six-cylinder direct injection diesel ...

Compression ignition engine is a popular prime mover in rural areas, particularly in the places where electrical power is not available. The rapid depletion of fossil fuel has stimulated worldwide efforts to produce alternative fuel to diesel fuel. Use of bio fuel as an alternative fuel can contribute significantly towards the twin problem of fuel crises. The fuel of bio origin may be the bio d...

In spark ignition (SI) engines, the accurate control of air fuel ratio (AFR) in the stoichiometric value is required to reduce emission and fuel consumption. The wide operating range, the inherent nonlinearities and the modeling uncertainties of the engine system are the main difficulties arising in the design of AFR controller. In this paper, an optimization-based nonlinear control law is a...