Ferula orientalis L. stalks were used as an agricultural solid biomass waste for preparation of activated carbon with zinc chloride activation using slow pyrolysis in a fixed-bed reactor. The chemical characteristics of the activated carbon obtained at 550 C were identified by elemental, fourier transform infrared spectroscopy, Brunauer–Emmett–Teller, scanning electron microscopy analyses and f...

The adsorption characteristics of methylene blue (MB) onto needles of Pinus sylvestris L., an unconventional bio-adsorbent, were investigated. Maximum removal of MB was found to occur at initial pH 5. Adsorption capacity increased from 84.46 to 99.73 mg/g with an increase in temperature from 20 to 45°C at 200 mg/L of initial MB concentration. Adsorption isotherms were modeled with the Langmuir,...

Chemically modified kenaf core fibres were prepared via esterification in the presence of citric acid (CA). The adsorption kinetics and isotherm studies were carried out under different conditions to examine the adsorption efficiency of CA-treated kenaf core fibres towards methylene blue (MB). The adsorption capacity of the kenaf core fibres increased significantly after the citric acid treatme...

chromium is one of the major causes of environmental pollution. to remove heavy metal ions from water, microorganisms can be used. in this study, dead fungal biomass of aspergillus niger is used. the biomass was boiled in 0.5 n naoh solutions to increase the metal removal capacity of a.niger and was applied when the ph of wash solution was in the normal range. the optimum adsorption ph value ob...

This paper presents the feasibility of removal of MB dye from aqueous solution using activated carbon prepared from Usoro fiber (Adenia lobata). FTIR analysis revealed that many functional groups were present on the surface of the adsorbent. The adsorption Kinetics was analyzed by pseudo first order, pseudo second order and intra particle diffusion kinetics models. Results showed that MB adsorp...

Background & Aims of the Study: Dyes have significant role in environmental problems, due to their toxic effects on the food chain and sources of water. The purpose of this research was to study the adsorption of acid yellow 36 dye onto pinecone using batch system. Materials & Methods: This research was performed at laboratory scale and batch system. Equilibrium isotherms...

Adsorption characteristics of potentially toxic metals in single- and multi-metal forms onto ferronickel slag were evaluated. Competitive sorption of metals by ferronickel slag has never been reported previously. The maximum adsorption capacities of toxic metals on ferronickel were in the order of Cd (10.2 mg g(-1)) > Cu (8.4 mg g(-1)) > Zn (4.4 mg g(-1)) in the single-metal adsorption isotherm...

Adsorption of ammonia from anaerobic digester effluent by magnetically modified zeolite (MMZ) has been investigated using a batch technique and comparison of adsorption isotherm equations. Adsorption isotherm models were utilized to describe the equilibrium isotherms and the isotherm constants were calculated. The sorption of ammonia follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) m...

The adsorption studies of phenol from aqueous solution on allium sativum peel have been studied in the range of 50-250 mg/L initial phenol concentration .The study was carried out as function of contact time, pH, initial phenol concentration,allium sativum Linn peel dosage and temperature. The experiment demonstrated the maximum phenol was obtained at in pH of 2 and it takes 6h to attain equili...

background and purpose: phenol is one of prevalent contaminants found in many industrial wastewaters. the combination with special features, such as high toxicity, carcinogenic properties, vitality gathering ability, low biodegradation potentiality and others, based on the u.s environmental protection agency, classified as a priority pollutant. the purpose of this study was to determine the eff...