In the present study, fracture toughness of functionally graded steels in crack divider configuration has been modeled. By utilizing plain carbon and austenitic stainless steels slices with various thicknesses and arrangements as electroslag remelting electrodes, functionally graded steels were produced. The fracture toughness of the functionally graded steels in crack divider configuration has...

Accurate estimation of fracture behavior of commercial LiMn₂O₄ particles is of great importance to predict the performance and lifetime of a battery. The present study compares two different microscale techniques to quantify the fracture toughness of LiMn₂O₄ particles embedded in an epoxy matrix. The first technique uses focused ion beam (FIB) milled micro pillars that are subsequently tested u...

S E On the Fracture Toughness of Advanced Materials A R C H By Maximilien E. Launey, and Robert O. Ritchie* N E W S Few engineering materials are limited by their strength; rather they are limited by their resistance to fracture or fracture toughness. It is not by accident that most critical structures, such as bridges, ships, nuclear pressure vessels and so forth, are manufactured from materia...

STATEMENT OF PROBLEM Resin composites are brittle materials and their major shortcomings are manifested in their sensitivity to flaws and defects. Although various mechanical properties of resin composites have been described, few studies are available on assessing the effect of bleaching agents on resin composites using the short rod design. PURPOSE To place various resin composites into dis...

Fracture toughness anisotropy of AA2139 (Al-Cu-Mg) in T351 and T8 conditions has been investigated via mechanical testing of smooth and notched specimens of different geometries, loaded in the rolling direction (L) or in the transverse direction (T). Fracture mechanisms were investigated via SEM and synchrotron radiation computed tomography (SRCT). Contributions to failure anisotropy are identi...

Heat-treatment in lithic technology refers to the controlled heating of quartz-rich, brittle, elastic lithic materials in order to reduce fracture toughness and improve knapping qualities. Successful heat-treatment reduces the point-tensile strength of many varieties of micro-crystalline quartz, including chert, without perceptibly altering any of the other properties with regard to fracture. T...

The purpose of this study was to compare the properties of 2 new dual-cure, bulk-fill restorative composite resins to those of a hybrid composite resin material. Depth of cure, fracture toughness, porosity, microleakage, and volumetric shrinkage properties were examined. With the exception of fracture toughness, significant differences were found among materials. Compared to the incrementally p...

The effects of temperature and loading rate on delamination growth were studied. The delamination fracture toughness of IM7/K3B was measured at 149°C, 177°C, and 204°C. At each temperature the tests were performed with a variety of loading rates so that the delamination initiated over the range of time from 0.5 sec to 24 hrs. The double cantilever beam (DCB) test was used to measure fracture to...

ID No. : FC-168 ABSTRACT Fiber-reinforced self-healing ceramic (shFRC) [1] is considered to be most attractive candidate of next generation structural materials using at high temperature, e.g. turbine blade, exhaust component of car engine etc. The shFRCs consist of three components, which are oxide fiber bundle, oxide matrix and self-healing agent interlayer. As the self-healing is generated a...