In this paper combined Brayton–Rankine cycle was mathematically simulated. In the Matlab program package an adequate numerical procedure has been developed to determine the maximum thermal efficiency of the combined cycle limited by the temperature of exhaust gases at the entrance of the gas turbine and the temperature of the condensation of water vapour in the steam condenser. Furthermore, add...

The dynamics of soot formation in turbulent ethylene–air nonpremixed counterflow flames is studied using direct numerical simulation (DNS) with a semi-empirical soot model and the discrete ordinate method (DOM) as a radiation solver. Transient characteristics of soot behavior are studies by a model problem of flame interaction with turbulence inflow at various intensities. The interaction betwe...

A swirling CH4/air diffusion flame at atmospheric pressure was stabilized in a gas turbine model combustor with good optical access. The investigated flame with a thermal power of 10 kW and an overall equivalence ratio of 0.75 exhibited pronounced thermoacoustic oscillations at a frequency of 295 Hz. The main goal of the presented work was a detailed experimental characterization of the flame b...

We analyze the structure of diffusion flames at high pressure in the limit of large activation energy for the particular configuration of a steady flame in counterflow. We consider the fluid to be near the thermodynamic critical point in which case the effective mass diffusivity is negligible, and Soret diffusion is the dominant mechanism for fuel mass transport. Temperature and species profile...

Original scientific paper In this paper, influence of flame spraying and fusing on microstructure of substrates made from heat treated carbon steel C45, a heat treated low alloyed 42CrMo4 steel and stainless austenitic steel X6CrNiMo18-10-2, has been investigated. Flame spraying and fusing is a deposition technique commonly applied to nickel-base self-fluxing alloys (NiCrBSi alloys). Because of...

Our objective is to characterize gravity effects on the structure of laminar methane–air partially premixed flames through detailed simulations. We examine the heat loss due to radiation from similar flames that are established at various gravitational accelerations and coflow velocities. Radiation is modeled using the optically thin assumption that provides a limiting value for the radiation h...

Hot surface ignition was examined using a variety of heat sources in a series of premixed hydrocarbon, hydrogen, and air mixtures. Building off previous work, hexane-air, heptane-air and hydrogen-air experiments were performed in addition to the eventual hexane-hydrogen-air mixtures. Using high-speed schlieren photography, thermocouples, and a fast-response pressure transducer, flame characteri...

Autoignition of binary blends of n-butanol and n-heptane was studied in a rapid compression machine at an equivalence ratio of 0.4 and a compressed pressure of 20 bar with the compressed temperature varying from 700 K to 907 K. Within the temperature range covered in this study, no cool flame or negative temperature coefficient behavior was observed for neat n-butanol. With the presence of n-he...

Title of Document: Measurements of Soot Temperature in a Diffusion Flame Using a Digital Camera Jose Castillo Moreno, Master of Science, 2012 Directed by: Peter B. Sunderland, Associate Professor, Department of Fire Protection Engineering Temperatures were measured in a laminar axisymmetric diffusion flame with a digital camera. The camera was a Nikon D700, modified to remove the Infra-Red (IR)...