The entrance of Cd (II) to aqueous environments causes a major problem to human health. The current article examines the efficiency of TiO2 and γ-Al2O3 nanoparticles in Cd (II) removal from aqueous medium as influenced by different chemical factors, such as pH, initial concentration, background electrolyte, and ionic strength, in accordance with standard experimental methods. It conducts Batch ...

Rice husk ash (RHA), an agricultural waste, was used as biosorbent for the removal of Iron(II) and Manganese(II) ions from aqueous solutions. The structural and morphological characteristics of RHA and its elemental compositions before and after adsorption of Fe(II) and Mn(II) were determined by scanning electron microscopic (SEM) and X-ray fluorescence (XRF) analyses. Batch experiments were ca...

The adsorption properties and mechanics of selected endocrine disrupting compounds; 17 β-estradiol, 17 α – ethinylestradiol and bisphenol A on locally available black tea leaves waste and granular activated carbon were investigated. The results obtained indicated that the kinetics of adsorption were pH, adsorbent dose, contact time and temperature dependent with equilibrium being reached at 20 ...

Analytical isotherm equations such as Langmuir and Freundlich isotherms are widely used for modeling adsorption data. However, these isotherms are primarily useful for simulating data collected at a fixed pH value and cannot be easily adapted to simulate pH-dependent adsorption effects. Therefore, most adsorption studies currently use numerical surface-complexation models (SCMs), which are more...

This study investigates the capacity of granular activated carbon (GAC) for the storage of methane through the equilibrium adsorption. An experimental apparatus consist of a dual adsorption vessel was set up for the measurement of equilibrium adsorption of methane on GAC using volumetric technique (pressure decay). Experimental isotherms of methane adsorption were determined by the measurement ...

In this study, two Carbon Molecular Sieves using Pistachio shell (CMS P) and Walnut shell (CMS W) were prepared by a chemical vapor deposition method and used for pressure swing adsorption and separation of CO/H2 and CO/CH4. Adsorption isotherms of gases obtained for both CMS’s. The Dubinin-Radushkevich isotherm model was used for comparing pore volum...

nanoparticles of manganese-dioxide synthesized by mechano-chemical reaction were used foras(iii) and as(v) sorption from water environment. the influence of a milling time of manganese-dioxide on sorption was examined with batch procedure. sorption as a function of contact time was investigated. kinetic of sorption, for both as(iii) and as(v), was fast. the equilibrium condition for milled sorb...

Introduction: Discharge of textile wastewater causes the reduction of sunlight penetration, interferes with the receiving waters ecology and damage the environment. The aim of this study was to determine the removal efficiency of reactive blue 19 dye from aqueous solutions by cuttlefish bone powder. Materials & Methods: This study was performed experimentally and in laboratory scale. In thi...

In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the...

Methyl orange is one dye resulted from the textile industry. The aim of this study is to test theadsorption capacity of nickel oxide nanoparticles for removing the methyl orange from aqueoussolution. The parameters studied were the effect of temperature, contact time and initial pH ofsolution. Results indicate that the removal efficiency of nickel oxide nanoparticles increases withincreasing co...