Interfacial fracture toughness and cyclic fatigue-crack growth properties of joints made from 99.5% pure alumina partially transient liquid-phase bonded using copper/niobium/copper interlayers have been investigated at both room and elevated temperatures, and assessed in terms of interfacial chemistry and microstructure. The mean interfacial fracture toughness, Gc, was found to decrease from 39...

A B S T R A C T The fracture of bone is a health concern of increasing significance as the population ages. It is therefore of importance to understand the mechanics and mechanisms of how bone fails, both from a perspective of outright (catastrophic) fracture and from delayed/time-dependent (subcritical) cracking. To address this need, there have been many in vitro studies to date that have att...

Self-healing polymers, based on microencapsulated dicyclopentadiene and Grubbs' catalyst embedded in the polymer matrix, are capable of responding to propagating fatigue cracks by autonomic processes that lead to higher endurance limits and life extension, or even the complete arrest of the crack growth. The amount of fatigue-life extension depends on the relative magnitude of the mechanical ki...

Through investigating and comparing the fatigue behavior of an as-forged Mg-6.7Zn-1.3Y-0.6Zr (wt.%) alloy before and after solid solution treatment (T4) in laboratory air, the effect of T4 treatment on fatigue crack initiation was disclosed. S-N curves illustrated that the fatigue strength of as-forged samples was 110 MPa, whereas the fatigue strength of T4 samples was only 80 MPa. Observations...

In recent years many experimental and numerical studies have been conducted on the fatigue behaviour of CNG storage pressure vessels. The main objective of these studies is to estimate the total fatigue life, which consists of two parts: i) Life till crack nucleation and ii) Crack growth life. Although fatigue evaluation methods for metal cylinders are widely covered in literature including the...

A B S T R A C T Various analogies have recently been proposed for comparing the stress fields induced in fretting fatigue contact situations, with those of a crack and a sharp or a rounded notch, resulting in a degree of uncertainty over which model is most appropriate in a given situation. However, a simple recent approach of Atzori–Lazzarin for infinite-life fatigue design in the presence of ...

A newly developed microstructure‐sensitive extreme value probabilistic framework for fatigue variability based on computational polycrystal plasticity is exercised to compare the driving forces for fatigue crack formation (nucleation and early growth) at room temperature for four different microstructure variants of duplex a Ti‐6Al‐4V alloy. The aforementioned probabilistic framew...

The corrosion fatigue performance of high-strength bolt was studied. Based on the fracture mechanics theory and the Gerberich-Chen formula, the high-strength bolt corrosion fracture crack model and the fatigue life model were established. The high-strength bolt crack depth and the fatigue life under corrosion environment were quantitatively analyzed. The factors affecting high-strength bolt cor...

ÐGamma-TiAl based alloys have recently received attention for potential elevated temperature applications in gas-turbine engines. However, although expected critical crack sizes for some targeted applications (e.g. gas-turbine engine blades) may be less than 0500 mm, most fatigue-crack growth studies to date have focused on the behavior of large (on the order of a few millimeters) through-thick...

For monolithic, grain-bridging ceramics, the crack-size dependence of the fatigue threshold during bridging zone development presents a difficulty in its application in design. This paper demonstrates how a fatigue threshold R-curve may express this crack-size dependence, analogous to the traditional fracture toughness R-curve, and may be used to predict the endurance limit and retained strengt...