Indentation creep tests and finite element simulations were performed on a model material to show that the constitutive equation for conventional uniaxial creep can be derived using the instrumented indentation testing technique. When the indentation pressure and the indentation creep rate are maintained at constant values of ps and _ 3⁄4inðsÞ, respectively, the contours of the equivalent stres...

Background—Creep-fatigue behavior is identified as the incorporated effects of fatigue and creep. One class of constitutive-based models attempts to evaluate creep and fatigue separately, but the interaction of fatigue and creep is neglected. Other models treat the damage as a single component, but the complex numerical structures that result are inconvenient for engineering application. The mo...

An evolutionary method is proposed for the constrained optimization of chemical engineering processes. Apart from the classical mutation, crossover and creep (small mutation), it makes use of several novel reproductive operators: shift, smoothing, extrapolation and swapping. An adaptive mutation rate is used to guard against stalling at local peaks. The method was able to solve dynamic optimiza...

Abstract Ambient cured epoxy adhesive is widely used for bonding fibre reinforced polymer (FRP) plates to metallic structures. The present paper examines a typical strengthening investigate the effect of thermo-viscoelasticity. response was determined using series tests multi-frequency scanning mode dynamic mechanical analyser (DMA). thermo-mechanical properties were then characterised time–tem...

Gamma titanium aluminides (γ-TiAl) display significantly improved high temperature mechanical properties over conventional titanium alloys. Due to their low densities, these alloys are increasingly becoming strong candidates to replace nickel-base superalloys in future gas turbine aeroengine components. To determine the safe operating life of such components, a good understanding of their creep...

SUMMARY c The concept that creep response is the result of a transient approach to a minimum strain rate continuously modified by accumulating damage has been investigated using high precision creep data. It was considered that the accumulated creep strain might be some measure of internal damage and curves of log creep strain rate against creep strain are shown to exhibit linearity at higher s...

The prediction of long-term deformations of concrete and reinforced concrete structures has been a field of extensive research and several different creep models have been developed so far. Most of the models were developed for constant concrete stresses, thus, in case of varying stresses a specific superposition principle or time-integration, respectively, is necessary. Nowadays, when modeling...

The tensile creep and creep-recovery behaviour of a unidirectional SiC fibre-Si3N4 matrix composite was analysed using finite element techniques. The analysis, based on the elastic and creep properties of each constituent, considered the influence of fibre-matrix bonding and processing-related residual stresses on creep and creep-recovery behaviour. Both twoand threedimensional finite element m...

Creep performance of zinc borate-treated strandboard from southern pine (Pinus taeda L.) and red oak (Quercus falcata) was investigated at 25°C temperature and 65% relative humidity. It was shown that the borate treatment had some signifi cant effect on creep defl ection of the test panels, and the effect varied with wood species. There was no signifi cant effect of creep loading on residual be...

Multiple rheological studies have characterized the dynamic material properties of adult vitreous, but no studies have investigated vitreous properties in the immature eye. In this study, premature, infant and adult ovine vitreous specimens were tested in shear to identify differences in dynamic moduli with age. Significant inertial artifact and rapid degradation of the vitreous ex vivo hindere...