A simple strategy toward versatile encapsulations of inorganic nanocrystals, through a green hydrothermal treatment of commercial polyurethane sponge, was developed. This approach enables us to realize a general method to form a surface-adherent, N-doped coating with a controllable thickness for well-defined structures. These composites exhibit active properties in optical applications and ener...

C and N have been co-doped to improve the humidity sensing of zirconia, which shows fast response, short recovery good repeatability.

A novel strategy for the preparation of Si-doped hydroxyapatite (Si-HA) coatings on H2O2-treated carbon/carbon composites (C/C) was developed. HA coating was prepared on C/C through chemical liquid vaporization deposition (CLVD)/hydrothermal treatment. HA coating was immersed in an H2SiO3 solution at an autoclave at 413 K for transformation into Si-HA coating. The effects of H2SiO3 mass content...

OBJECTIVE To evaluate the bond stability of resin cements when luted to glass-reinforced alumina and zirconia CAD/CAM dental ceramics. STUDY DESIGN Eighteen glass-infiltrated alumina and eighteen densely sintered zirconia blocks were randomly conditioned as follows: Group 1: No treatment; Group 2: Sandblasting (125 µm Al₂O₃-particles); and Group 3: Silica-coating (50 µm silica-modified Al₂O₃-...

This article describes fretting behavior of zirconia and silicon nitride balls on an electro-deposited coating. Fretting tests are performed using a ball-on-flat configuration. The evolution of the kinetic friction coefficient is determined, along with slip ratio. Experimental results show that the steady-state friction coefficient between ceramic balls (Si₃N₄ and ZrO₂) and an electro-deposited...

Surface modification techniques have been applied to generate titanium implant surfaces that promote osseointegration for use in dental applications. In this study, strontium-doped brushite coatings were deposited on titanium by electrochemical deposition. The phase composition of the coating was investigated by energy dispersive X-ray spectroscopy and X-ray diffraction. The surface morphologie...

Yttria-stabilized zirconia (YSZ) has been used as a thermal/environmental barrier coating for gas turbine engine blades. Current methods of fabrication include air plasma spraying (APS) and electron-beam physical vapor deposition (EB-PVD). The APS technique results in a coating that loses effectiveness with thermal cycling. The EB-PVD technique deposits a columnar microstructure which accommoda...

Background and Aim: Bonding of zirconia to resin cement is challenging, and the zirconia surface requires surface treatment to yield an acceptable bond strength. This study aimed to evaluate the effect of different surface treatments on the bond strength of zirconia to a resin cement. Materials and Methods: In this in-vitro experimental study, 60 zirconia discs measuring 12 mm in diameter an...

Fruit and vegetable containers with microbe-free surfaces can be made by coating with titanium dioxide (TiO2) particles or nonmetal (C, N, B, F) doped-TiO2 particles, using wear resistant polymers, such as zein, and paint, as the binders and to form a continuous binding phase. The doped-TiO2 powders absorb visible light radiation, and thus possess a higher antibacterial effect than non-modified...

Yttria stabilized zlrconia doped with Bi203 shows an efficient luminescence due to the Bi 3+ ions. Two luminescent centres were observed which are ascribed to BIO 8 and BiO 7 groups.