The accumulated irreversible deformation in pavement under repeated vehicle loadings will cause fatigue failure of asphalt concrete. It is necessary to monitor the mechanical response of pavement under load by using sensors. Previous studies have limitations in modulus accommodation between the sensor and asphalt pavement, and it is difficult to achieve the distributed monitoring goal. To solve...

Tests were conducted on small samples of sclera taken from cattle eyes and human eyes to determine the mechanical properties of the tissue in compression. It was found that the elastic modulus for radial compressive stress of human sclera was more than a factor of 100 less than the modulus for circumferential tensile stress. The stress-strain relationship was found to be mildly nonlinear and ex...

We consider Calabi-Yau compactifications with one Kähler modulus. Following the method of Candelas et al. we use the mirror hypothesis to solve the quantum theory exactly in dependence of this modulus by performing the calculation for the corresponding complex structure deformation on the mirror manifold. Here the information is accessible by techniques of classical geometry. It is encoded in t...

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

The mechanical response of a homogeneous isotropic linearly elastic material can be fully characterized by two physical constants, the Young's modulus and the Poisson's ratio, which can be derived by simple tensile experiments. Any other linear elastic parameter can be obtained from these two constants. By contrast, the physical responses of nonlinear elastic materials are generally described b...

Nanocrystalline nc materials are known to deform via mechanisms not accessible to their coarse-grained counterparts. For example, deformation twins and partial dislocations emitted from grain boundaries have been observed in nc Al and Cu synthesized by severe plastic deformation SPD . This paper further develops an earlier dislocation-based model on the nucleation of deformation twins in nc fac...

Cells cultured in vitro using traditional substrates often change their behavior due to the lack of mechanical deformation they would naturally experience in vivo. To mimic the in vivo mechanical environment, we design temperature-responsive hydrogels with patterned surface creases as dynamic cell stretching devices. A one-step photolithographic method is first employed to pattern integrin-bind...

We present a methodology of accurately reconstructing the deformation and surface characteristics of a scanned 3D model recorded in real-time within a Finite Element Model (FEM) simulation. Based on a sequence of generated surface deformations defining a reference animation, we illustrate the ability to accurately replicate the deformation behavior of an object composed of an unknown homogeneou...

Estimation of the stiffness of a biological soft tissue is useful for the detection of pathologies such as tumors or atherosclerotic plaques. Elastography is a method based on the comparison between two images before and after a forced deformation of the tissue of interest. An inverse elasticity problem is then solved for the Young modulus estimation. In the case of arteries, no forced deformat...