The unique concept of phase reversion involving severe deformation parent austenite into martensite, followed by annealing for a short duration, whereby the strain-induced martensite reverts to austenite, was adopted obtain nano-grained/ultrafine-grained (NG/UFG) structure in Cu-bearing biomedical austenitic stainless steel resulting high strength-high ductility combination. Work hardening and ...

Modeling of shape-memory alloys represents a multiscale problem due to occurrence of martensite/austenite phase transformation and a microstructure in the deformation gradient typical for martensitic phase. Inspired by relaxation in static situation, a limit passage between two modeling scales, called microand meso-scales, is performed for the corresponding evolution variants with considering a...

The stability of the retained austenite has been studied in situ in low-alloyed transformation-induced-plasticity (TRIP) steels using high-energy X-ray diffraction during tensile tests at variable temperatures down to 153 K. A detailed powder diffraction analysis has been performed to probe the austenite-to-martensite transformation by characterizing the evolution of the phase fraction, load pa...

The formation of stress-induced martensite in superelastic NiTi was studied by neutron diffraction during uniaxial compressive loading and unloading. The respective phase fractions were determined as a function of the applied stresses using a Rietveld refinement with a March–Dollase texture formulation. Before loading, the specimen was fully austenitic. At the highest applied stress of 2625 MPa...

The influence of thermomechanical deformation on the residual stresses caused by quenching in bar shaped specimens of heat treatable steel 42CrMo4 has been investigated using a mechanical method for detemining the distribution of residual stresses of the first kind. The results obtained show that the residual stress distribution after quenching is dected by the strengthening and softening of th...

The dynamic behavior of three high manganese steels with very different stacking faultenergy (SFE) values (4-30 mJ/m2) were studied using high strain rate torsional tests. The hotrolledmicrostructure of the steel with the lowest SFE of 4 mJ/m2 consisted of a duplex mixture ofaustenite and ε-martensite, but those of the other two steels were fully austenitic. The deformedmicrostructures were stu...

The shape memory effect exhibited by Fe-Mn-Si based alloys is due to the y(f.c.c.)-e(h.c.p.) martensitic transformation. The martensitic transformation induced by traction at room temperature in a Fe16Mn-9Cr-5Si-4Ni (%mass) is here studied by optical microscopy, scanning electron microscopy, transmission electron microscopy and scanning tunnelling microscopy. The martensitic microstructure and ...

It is increasingly important in the context of high–manganese steels of the kind that lead to twinning–induced plasticity to be able to estimate the temperature at which ε–martensite forms when austenite is cooled. We find that the thermodynamic method used in similar calculations for α martensite cannot in many cases be implemented because of apparently imprecise thermodynamic data, a conclusi...