Copper-β-amyloid 16 (Aβ16) complexes were investigated by electrospray ionization mass spectrometry (ESI-MS). Copper(i) and (ii) complexes were formed on-line in a microchip electrospray emitter by using a sacrificial copper electrode as the anode in positive ionization mode. In the presence of ascorbic acid in the peptide solution, the amount of Cu(i)-Aβ16 generated electrochemically was even ...

Copper-b-amyloid 16 (Ab16) complexes were investigated by electrospray ionization mass spectrometry (ESI-MS). Copper(I) and (II) complexes were formed on-line in a microchip electrospray emitter by using a sacrificial copper electrode as the anode in positive ionization mode. In the presence of ascorbic acid in the peptide solution, the amount of Cu(I)-Ab16 generated electrochemically was even ...

Antimony and arsenic concentrations their oxidation states (Sb(III), Sb(V), As(III) As(V)) in copper electrorefining electrolyte can affect cathode quality through the formation of floating slimes. A laboratory-scale pilot plant was operated to remove Sb from commercial electrolyte. The consisted a pre-treatment process with shavings followed by ion exchange. results indicated that Sb(III) remo...

Combined electrochemical and hydrothermal assisted by microwave was used for the preparation of copper phthalocyanin blue (Cu Pc) nanoparticles with sizes ranging from 5 to 35 nm. Phthalic anhydride, urea and ammonium molybdate catalyst were dissolved in aqueous solution of 1 M NH4Cl containing a small amount of lauric acid as capping agent to suppress the flocculation of pigment. Electrodes we...

Thermal energy was shown to be efficiently converted into electrical power in a thermally regenerative ammonia-based battery (TRAB) using copper-based redox couples [Cu(NH3)4 /Cu and Cu(II)/Cu]. Ammonia addition to the anolyte (2 M ammonia in a copper-nitrate electrolyte) of a single TRAB cell produced a maximum power density of 115 1 W m 2 (based on projected area of a single copper mesh elect...

This study provides an electrocoagulation process for the removal of copper from water using mild steel and stainless steel as anode and cathode, respectively. The effect of different operating parameters and coexisting ions on the removal efficiency of copperwas investigated. The results showed that the optimum removal efficiency of 97.8% was achieved at a current density of 0.02 A/dm2 and a p...

The electrochemical migration (ECM) behavior of copper-clad laminate (PCB-Cu) and electroless nickel/immersion gold printed circuit boards (PCB-ENIG) under thin electrolyte layers of different thicknesses containing 0.1 M Na₂SO₄ was studied. Results showed that, under the bias voltage of 12 V, the reverse migration of ions occurred. For PCB-Cu, both copper dendrites and sulfate precipitates wer...