natural convection heat transfer has many applications in different fields of industry; such as cooling industries, electronic transformer devices and ventilation equipment; due to simple process, economic advantage, low noise and renewed retrieval. recently, heat transfer of nanofluids have been considered because of higher thermal conductivity coefficient compared with those of ordinary fluid...

This paper experimentally studies the heat absorption performance of a heat sink with vertical embedded heat pipes in the aluminum blade. The cooling system with embedded heat pipes distributes heat from the CPU to both the base plate and the heat pipes, and then transfer heat from fins to the Environment. The thermal resistance and heat transfer coefficient are evaluated for natural convection...

An experimental study is reported on natural convection heat transfer from a helical heating coil to the surrounding fluid. The coil is heated electrically and the surrounding fluid is selected to be water. The range of parameters are: Rayleigh number, 879 ?£ Ra ?£ 780168, Prandtl number, 4.22 ?£ Pr ?£ 10.02, dimensionless coil diameter,7.69 ?£ Dave /d ?£ 10.77, number of coil rings, 2 ?£ N ?£ ...

mixed convection fluid flow and heat transfer of water-al2o3 nanofluid inside a lid-driven square cavity has been examined numerically in order to find the optimal distribution of discrete heat sources on the wall of a cavity. the effects of different heat source length, richardson number and grashof number on optimal heat source location has been investigated. moreover, the average nusselt num...

Heat and vapour convective surface coefficients are required in practically all heat and vapour transport calculations. In building envelope research, such coefficients are often assumed constants for a set of conditions. Heat transfer surface coefficients are often determined using empirical correlations based on measurements of different geometry and flows. Vapour transfer surface coefficient...

Nanofluids, in which nano-sized particles (typically less than 100 nm) are suspended in liquids, have emerged as a possible effective way of improving the heat transfer performance of common fluids. In this paper a numerical study is performed to analyze the wall shear stress and heat transfer coefficient of γAl2O3-water nanofluids under laminar forced convection through a circular pipe. It is ...

Shrinking the engine has been a great interest for many years. Providing more amount of heat transfer may supply possibilities for size reduction in engine parts specifically the engine water jacket that is of concentration for the present study. Boiling phenomenon, by providing more amounts of heat transfer in comparison with single-phase, provides conditions for size reduction. In this paper ...

The interaction of thermal radiation with conduction and laminar natural convection in a vertical circular pin, situated at participating gas, is numerically investigated. An absorbing and emitting gas is considered, and treated to be a gray participating media. Under the idealizing of gray gas, the Rosselan4 approximation is employed to describe the radiative heat flux in the energy equation. ...

This paper reports the thermal performance of a new cylindrical solar collector based on an experimental investigation with this difference that instead of the collector tube with absorbent coating, coil into a spiral copper tube is placed in the center of the collector. The spiral shape of the tube, heat transfer without disruption or increase the heat transfer area, is increasing. In this cas...

The present paper focuses on problem of mixed convection fluid flow and heat transfer of Al2O3-water nanofluid with temperature and nanoparticles concentration dependent thermal conductivity and effective viscosity inside Lid-driven cavity having a hot rectangular obstacle. The governing equations are discretized using the finite volume method while the SIMPLER algorithm is employed to couple v...