A compact reformer to generate hydrogen for portable fuel cell applications is presented. This reformer is a conventional type single-path tubular reactor packed with granular catalyst particles in which steam reforming and catalytic partial oxidation reactions take place in series using a mixture of methanol and water as a feed. The novel feature of this reformer is in the interlacing of the f...

As an extension of chemical looping combustion, chemical looping steam reforming (CLSR) has been developed for H2 production. During CLSR, a steam reforming (SR) process occurs following the reduction of catalysts by the reforming feedstock itself (termed “auto-reduction”), as opposed to a separate, dedicated reducing agent like H2. This paper studied SR performances of four common bio-compound...

Initial results are presented for the production of hydrogen from waste lubricating oil using a chemical looping reforming (CLR) process. The development of flexible and sustainable sources of hydrogen will be required to facilitate a ‘hydrogen economy’. The novel CLR process presented in this paper has an advantage over hydrogen production from conventional steam reforming because CLR can use ...

A long term pilot scale experiment with steam reforming treatment technology was conducted for volume and weight reduction of uranium contaminated waste tri-n-butyl phosphate/n-dodecane solvent (TBP/dodecane) which was difficult to incinerate. The technology consists of a steam reforming process and a submerged combustion process. In the first process, TBP/dodecane is vaporized and pyrolyzed wi...

A combined catalyst and sorbent was developed for reacting CO with steam to produce H2 in a single reaction stage at 600 °C by employing the water gas shift (WGS) reaction. The combined material was in the form of spherical pellets where each pellet consisted of a CaO core for absorbing byproduct CO2 surrounded by a porous shell of Al2O3 which supported a Ni catalyst. The best results were achi...

The co-generation facilities have maximal thermal efficiency. In the case of Russian Federation, for power production industry, development combined cycle (CCGT-CHP) is especially urgent. CCGT-CHP daily load schedule requires demand both electricity and heat, heat depends only upon ambient air temperature. gas turbine reduction subsequent steam during electric drop down are limited by necessity...

the use of natural products as medicinal agents presumably predates the earliest recorded history. ocimum sanctum l., is a plant which is used in several traditional medicine systems to cure various diseases. in this study aerial parts of ocimum sanctum were collected on august 2014 from shahr-e-rey in iran. fresh and dry partsof plants essential oils were extracted with hydro-distillation and ...

Nanoparticles of tin oxide, doped with Ce and Y, were prepared using the polymeric precursor method. The structural variations of the tin oxide nanoparticles were characterized by means of nitrogen physisorption, carbon dioxide chemisorption, X-ray diffraction, and X-ray photoelectron spectroscopy. The synthesized samples, undoped and doped with the rare earths, were used to promote the ethanol...

Hydroxyapatite (HAp) supported Nickel (Ni) catalyst was prepared using wet impregnation method. A series of Ni/HAp catalysts have been prepared by varying the amount of nickel viz., 3, 6 and 12 %. The highest Brunauer-Emmett-Teller (BET) surface area of 92.18 m/g was noticed for a catalyst composition containing 3% nickel loading. The scanning electron microscopy (SEM) studies revealed a smooth...

Ni-YSZ anode supported solid oxide fuel cells (ASCs) were tested under various simulated syngas. There was no voltage degradation of the cell operated on 41%H2-7%CH4-6%CO-11%CO2-35%H2O fuel condition for nearly 450 hours. However, the high vapor content reduced the open circuit voltage (OCV) and discharge voltage. The cells run steadily with most dry syngas until the simulated reforming tempera...