Investigations were carried out on the effective utilization of blast furnace flue dust samples obtained from the two integrated steel plants at Rourkela and Jamshedpur. The samples essentially contained unburnt coke and iron rich grains as the value added products. Flotation technique was employed to recover the carbon values present in the sample. It was possible to obtain a product containin...

A novel mineral slurry assaying method combining visible and near-infrared reflectance spectroscopy and traditional X-ray fluorescence has recently been developed. The improved method is capable of high-frequency assaying of slurry grades in zinc and copper flotation, thus being able to reveal possible rapid oscillations in the grades. In this study, the new measurements are used to detect osci...

Nowadays recycling wastewater is a task in progress. New ways of contamination have appeared together with the technology development. Our article deals with the case of wastewater contaminated with dispersed colorants that are used during the decoration of paper boxes for packaging various products. The wastewater treatment is based on the electro-flotation process. The system is fully automat...

A simple, rapid and economic procedure was presented to remove lead(II) from aqueous solution under the optimized conditions. It is based on the sorption of Pb2+ ions from aqueous solutions onto limestone fines (LS), which is an inexpensive and widespread over the globe, followed by flotation with oleic acid (HOL) surfactant. The different parameters (namely: solution pH, sorbent...

Flotation is, doubtless, the most important process among the various techniques used for the treatment of ore. This generalpurpose technique allows the treatment of several complex ores (lead zinc, copper zinc), sulphides (copper, lead, and zinc), oxides (hematite, quartz), oxidized minerals (malachite, cerusite) and even non-metal ores (fluorite, phosphate, coal). Due to the flotation, it is ...

The metallurgical performance of the column flotation process is determined by the concentrate grade and recovery. Although the former can be continuously measured using an on-stream analyzer, the latter must be estimated by a material balance calculation based on seldom verified steady-state assumptions. Consequently, the automatic control and optimization of flotation columns should be perfor...

Flotation is, doubtless, the most important process among the various techniques used for the treatment of ore. This generalpurpose technique allows the treatment of several complex ores (lead zinc, copper zinc), sulphides (copper, lead, and zinc), oxides (hematite, quartz), oxidized minerals (malachite, cerusite) and even non-metal ores (fluorite, phosphate, coal). Due to the flotation, it is ...