نتایج جستجو برای: co removal
تعداد نتایج: 469981 فیلتر نتایج به سال:
Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...
The scandium analogue of the flexible terephthalate MIL-53 yields a novel closed pore structure upon removal of guest molecules which has unusual thermal behaviour and stepwise opening during CO(2) adsorption. By contrast, the nitro-functionalised MIL-53(Sc) cannot fully close and the structure possesses permanent porosity for CO(2).
Boron doping into carbon nanotubes improves the CO tolerance and increases the utilization efficiency of the supported Pt nanoparticles. Boron doping leads to a uniform deposition of Pt nanoparticles and also facilitates the removal of CO from the Pt surface, resulting in an increase in the electrocatalytic activity for methanol oxidation.
Introduction: Endocrine disruptive compounds as a class of organic contaminants in the aquatic environment received severe attention in the last decades. The release of bisphenol A (BPA) as a hazardous organic chemical into the environment has caused high health and environmental concerns. Therefore, its removal from aquatic environments is strongly recommended. The present study deals with BPA...
In the laser cutting process some well-known parameters, e.g. laser power and cutting speed, play major roles in the performance of the process. Each parameter or a combination of parameters can affect the material removal volume and cutting volume efficiency. The purpose of this research is to study the effect of power and maximum cutting speed on the material removal rate (MRR) and cutting vo...
Corn cob as a low cost adsorbent was used in the present work for the removal of toxic heavy metal Co2+ from aqueous solutions. Bath experiments were used to determine the best adsorption conditions. The equilibrium adsorption level was determined as a function of solution pH, temperature (T), contact time (tc), initial adsorbate concentration, and adsorbent dosage. Effective removal of metal i...
and Implications To increase utilization of artificial insemination by beef producers, estrous and ovulation synchronization protocols must be re-evaluated in an attempt to reduce labor, cost, number of handlings, or a combination thereof without negatively impacting pregnancy rates. One potential way to reduce cost in these systems is through the strategic removal of hormones, such as the cont...
Background and Objective: Arsenic (As) is a highly toxic metalloid found in ground and surface waters. Arsenic contamination in drinking water leads to harmful effects on human health. In this study, the efficacy of Reverse Osmosis (RO) membrane technology was evaluated for arsenic removal from drinking water. Materials and Methods: This experimental study was carried out on RO membrane spiral-...
Reducing agents-Enhanced electrokinetic Soil Remediation (EKSR) was performed for the removal of chromium (Cr), cobalt (Co) and nickel (Ni) from contaminated soil. The reducing agents oxalic acid and ascorbic acid were investigated under constant voltage gradient (2.0 V/cm), current changes, pH, redox potential, concentration changes and removal performance of Heavy Metals (HMs). The result...
Nowadays, the replacement of renewable energies such as biofuels is one of the main priorities in environmental programming and investments. This study is based on sustainable strategy towards integrating algal biomass generation as a green feedstock with wastewater treatment, CO2 bio-fixation, and bioenergy production. Therefore, the performance of Trichormus variabilis in ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید