A controlled greenhouse experiment was conducted to study the fraction, uptake and fixation of phosphorus (P) and potassium (K) in three soils with contrasting characteristics. The experiment was carried out in two phases, viz., sorghum-Sudangrass depletion and test crop experiment with maize with three levels of fertility status (depleted, original and fertilized with 40 mg kg-1 P and K) and t...

Thermal spraying coating techniques have lately emerged as very effective surface protection technology to apply protective coatings for corrosion and wear resistance applications. These coatings have gained more importance in recent past. Advances in powder and wire production have resulted in development of various types of surface coatings with excellent wear and corrosion resistance propert...

Nanocomposite coatings of TiN/a-C were prepared on tool steel substrates using a multitarget reactive DC magnetron sputtering process at various TiN layer thicknesses (0.6–2.8 nm). The a-C layer thickness was approximately 0.45 nm. Structural characterisation of the coatings was done by X-ray diffraction (XRD). Incorporation of an a-C phase in TiN matrix reduced crystallite size of the coatings...

Anthrosols known as Amazonian Dark Earth (ADE) have borne witness to the intensification of sedentary patterns and the demographic increase in Central Amazon. As a result, a recurring pattern has been observed of mounds with ADE arising from domestic activities and the disposal of waste. The objective of this research was to demonstrate the relationship of these anthropic activities with pedoge...

The strengthening hard phases TiN/C1-xNxTi were generated by in-situ solid-gas reaction in Ni-based composite coatings prepared using a plasma spray welding process to reinforce the wear resistance of the coatings. The microstructures and properties of the coatings were investigated. The results showed that the coatings mainly consisted of phases such as TiN, C1-xNxTi, TiC, etc. A small amount ...

The effect of wax-containing microcapsules incorporated in silicone composite coatings deposited on aluminum (Al) alloy substrates on the tribological performance of the coatings was systematically investigated. The wax-containing microcapsules were prepared via in situ polymerization. The tribological behavior of the composite coatings was evaluated using ball-on-disk tribological test. It was...

The mechanical and electrical characteristics of films, buckypapers and fiber materials from combinations of clay, carbon nanotubes (CNTs) and chitosan are described. The rheological time-dependent characteristics of clay are maintained in clay-carbon nanotube-chitosan composite dispersions. It is demonstrated that the addition of chitosan improves their mechanical characteristics, but decrease...

Ni-Co duplex coatings were cladded onto Cu to improve the antiwear properties of Cu products. Prior to laser cladding, n-Al₂O₃/Ni layers were introduced as interlayers between laser cladding coatings and Cu substrates to improve the laser absorptivity of these substrates and ensure defect-free laser cladding coatings. The structure and morphology of the coatings were characterized by scanning e...

The influence of clay preparation methods on the sorption and hydrolysis of carbaryl (1-naphthyl, N-methyl carbamate) by K+-saturated reference smectite SWy-2 was studied. Four methods were utilized: (1) The reference (or specimen) clay used as received was K+-saturated (hereafter referred to as whole clay). (2) High-speed centrifugation (3295g) of whole clay resulted in a pellet with three dis...

ABSTRACT Estuaries provide an excellent depositional environment to study the interaction between minerals (clays, quartz sands…) and biofilms. The estuary bottom is largely covered by biofilms that impact sediment stability, mud clay-coat content in sands, sedimentary-structure thus influencing sandstone properties during burial. Although numerous oil, gas, geothermal reservoirs are exploited ...