In the present study, calcination conditions during the synthesis of zinc oxide nanoparticles were optimized using response surface methodology (RSM) based on central composite design (CCD). After that, the effect of the type of UV irradiation on the photocatalysis of methylene blue (MB) dye was studied based on the kinetic model obtained at optimum conditions. Analysis of variance (ANOVA) exhi...

Esterification of chitosan with adipic acid catalyzed by immobilized Candida antarctica lipase B was carried out in this study. Response surface methodology (RSM) based on a four-factor- five-level small central composite design (SCCD) was employed to model and analyze the reaction. A total of 21 experiments representing different combinations of the four reaction parameters including ch...

In this work, we successfully developed electromembrane extraction via preparation of an electrospun flat membrane based on device. The polyurethane-membrane was prepared by electrospinning method and used in EME. Affecting parameters on membrane preparation were optimized by Taguchi design. The developed method was used for extraction of phthalates as typical molecules and the proposed method ...

In this work, thorium (IV) removal from aqueous solutions was investigated in batch systems of cationic and anionic resins of Amberlite IR-120 and IRA-400. In this way, the effects of pH, initial Th(IV) concentration and the amount of adsorbent were investigated. A Central Composite Design (CCD) under Response Surface Methodology (RSM) was employed to determine the optimized condition. The resu...

Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four inde...

The biosorption performance of Phlomis cancellata Bunge as inexpensive, abundant and easily available adsorbent for safranin cationic dye removal from aqueous system has been evaluated in a batch process, using response surface methodology and employing a central composite design Experimental. The influence of different parameters such as, pH, contact time, agitation rate and sorbent dosage on ...

The objective of this paper is simultaneous of aerobic and anaerobic process for phosphorus removal from a dairy wastewater. The system consists of a granular sequencing batch reactor (SBR) working under alternating aerobic/anaerobic conditions. In order to analyze the process, four significant variables viz. MLSS, COD/N ratio, aeration time and cycling time and four dependent parameters as the...

In this study, granulated sludge synthesized in a sequence batch reactor (SBR) and then granulated sludge was transferred to continuous feeding and intermittent discharge (CFID) bioreactor. Two independent variables (air flow rate and hydraulic retention time (HRT)) were considered to optimize the process. Subsequently, long term performance (150 days) of the bioreactor was assessed by monitori...

in this study, response surface methodology (rsm) was used to optimize osmo-dehydration of orange slice. effect of osmotic solution temperature in the range of 30 to 60 °c, immersion time from 0 to 300 min and sucrose concentration from 35 to 65 brix degree on water loss, solid gain, moisture content, water loss to solid gain ratio and brix change were investigated by central composite design (...

xanthan gum is an extracellular polysaccharide produced by various xanthomonas species such as x. campestris . the objective of present study was to investigate the influence of different carbon and nitrogen sources on xanthan gum production by x. campestris . using an experimental response surface methodology (rsm) complemented with a central composite design (ccd), the impact of peptone, lact...