statement of problem: in order to increase the performance of glass ionomer cement, it is reinforced with metal powders, short fibers, bioceramics and other materials. fluoroapatite (ca10 (po4 )6 f2 ) is found in dental enamel and is usually used in dental materials due to its good chemical and physical properties. objectives: in this study, the effects of the addition of synthesized fluoroapat...

effect of nanosilver (ns) on the heat-transferring rate to the core section of medium density fiberboard (mdf) mat was studied here. a 400 ppm aqueous nanosilver suspension was used at three consumption levels of 100, 150, and 200 ml/kg, based on the weight of dry wood fibers; the results were then compared with the control mdf panels. the size range of nanosilver was 30-80 nm. results showed t...

Concrete patch repair has long been used to repair the damaged concrete structures. In cold regions, freeze– thaw cycle is one of the major damage factors. Not only the material itself is damaged by freeze–thaw cycles, but also the adhesive interface, which is regarded as the weakest part of composite system, degrades under freeze–thaw cycles. Air entraining agent has long been used to increase...

BACKGROUND The purpose of this study was to investigate and compare three different pit and fissure sealants with different composition to check their effectiveness for sealing ability and microleakage. MATERIALS & METHODS Total 120 therapeutically extracted premolars devoid of any caries, anomalies or morphogenic diversity were collected and distributed equally in three groups (40 in each). ...

The mechanical properties of barnacle base plates were measured using a punch test apparatus, with the purpose of examining the effect that the base plate flexural rigidity may have on adhesion mechanics. Base plate compliance was measured for 43 Balanus amphitrite (=Amphibalanus amphitrite) barnacles. Compliance measurements were used to determine flexural rigidity (assuming a fixed-edge circu...

A composite hip prosthesis (CHP) made from alumina reinforced ultra high molecular weight polyethylene (UHMWPE) was designed and manufactured. The main objective of the study was to fabricate the composite hip prosthesis which would be an ideal replacement of metallic one as bone is a composite material consisting of collagen fibre matrix and embedded hydroxyapatite mineral. With this idea we d...

Introduction: Porcelain fracture is a relatively common problem in clinical dental practice. Various methods have been proposed for repairing porcelain fractures including direct composite resin repair or construction of a porcelain laminate veneer and its cementation with a resin cement. Evaluation of shear bond strength of porcelain repair methods was the purpose of this study. Methods: Tw...

Herein, the performance of graphene oxide (GO) in improving mechanical properties and subsequently reducing the permeability of cement composites used in concrete pavement, is studied. A polycarboxylate superplasticizer was used to improve the dispersion of GO flakes in the cement. The mechanical strength of graphene-cement nanocomposites containing 0.1–2 wt% GO and 0.5 wt% superplasticizer was...

OBJECTIVE STATEMENT OF PROBLEM Adequate bond strength between glass ionomer cements and composite resin is necessary for the success of the sandwich technique. PURPOSE OF STUDY This study assessed the micro-shear bond strength of composite resin to glass-ionomer cements (GIC) using self-etch adhesives with different pH values. MATERIALS AND METHODS One hundred specimens (6×4×2 mm) were m...