نتایج جستجو برای: carrier gas
تعداد نتایج: 314998 فیلتر نتایج به سال:
This paper describes a lab-scale simulated scrubber that was designed and built in the laboratory at Western Kentucky University’s Institute for Combustion Science and Environmental Technology. A series of tests on slurries of CaO, CaSO3, CaSO4/CaSO3 and Na2SO3 were carried out to simulate recirculating slurries in different oxidation modes. Elemental mercury (Hg) re-emission was replicated thr...
BACKGROUND AND AIMS Bispectral index (BIS) values may be anaesthetic agent-specific, depending on their ability to suppress the electroencephalogram (EEG) signals. We carried out a prospective, randomised clinical trial to study the effect of nitrous oxide (N2O) on the BIS values at an equi-minimum alveolar concentration (MAC) of sevoflurane and desflurane. METHODS Sixty adult patients underg...
The dependence of analyte sensitivity and vaporization efficiency on the operating parameters of an inductively coupled plasma mass spectrometer (ICPMS) was investigated for a wide range of elements in aerosols, produced by laser ablation of silicate glass. The ion signals were recorded for different carrier gas flow rates at different plasma power for two different laser ablation systems and c...
The Swiss Spallation Neutron Source SINQ of the Paul Scherrer Institute provides neutrons via proton-induced spallation reactions in a lead target. Produced are thermalized and impinge on 235U-targets, enclosed three-part chamber assembly, which is located inner wall shielding. thermal-neutron-induced fission products can be readily transported from this assembly to radiochemical laboratory usi...
a dissolved methane sensor based on silicone tube was designed, constructed and optimized.the silicone tube diameter, silicone tube length and helium flow rate (as the carrier gas(were considered as process parameters to be optimized.a continuous stream of helium (50 ml/min) was directed through the tubing, sweeping out the dissolved methane which diffused through the walls of the tubing from t...
One of the big concerns of big cities is facing with the increase of fossil fuel vehicles in the roads. The cars intensify greenhouse gas emission in civic centers. One approach to reduce the emission is replacing the cars by Plug-In Electric Vehicles (PEVs). In spite of reducing the emission, PEVs have some adverse effect on electric distribution networks. Technical challenges such as load and...
In this paper by using DC arc discharge method and acetylene gas, as the carbon source, and nitrogen, as the carrier gas, canrbon nanotubes, CNTs, doped with trivalent element boron, B, have been produced. The deposited CNTs on the cathod electrod, which have structural doped properties to boron element, have been collected and after purification have been investigated by back-scattering Raman...
Nanostructures have considerably higher surface areas than their bulk counterparts; thereforesurfaces often play important, sometimes even dominant, roles in the nanostructure properties. Thenanocrystalline and nanotubes have low band gaps and high carrier mobility, thus offeringappealing potential as absorption gas. Interaction between methanol molecules and carbonnanotube is investigated usin...
A dissolved methane sensor based on silicone tube was designed, constructed and optimized.The silicone tube diameter, silicone tube length and helium flow rate (as the carrier gas(were considered as process parameters to be optimized.A continuous stream of helium (50 mL/min) was directed through the tubing, sweeping out the...
Ultrasonic atomization, a process of generating fine droplets through irradiation of high-frequency ultrasound to a gas–liquid interface from the liquid underneath, is applied to separating ethanol from its aqueous solution. Towards its practical use, the process of collecting in two cooling stages the ethanolenriched mist—generated via an ultrasonic atomizer (ultrasonic transducer operated at ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید